Read these original operating instructions and the enclosed safety instructions before using the device for the first time. Proceed accordingly.

Keep both books for future reference or for future owners.

The KÄRCHER Home & Garden app contains:

• Installation and initial startup information

• Information about the areas of application

• Tips & Tricks

• FAQ with detailed troubleshooting

• Connection to the KÄRCHER Service Centre

The app can be downloaded here:

---

Trademarks

• ^™ and ^™ are trademarks or registered trademarks of Google Inc.

• ^® and ^® are trademarks or registered trademarks of Apple Inc.

The packing materials can be recycled. Please dispose of packaging in accordance with the environmental regulations.

Electrical and electronic appliances contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which - if handled or disposed of incorrectly - can pose a potential danger to human health and the environment. However, these components are required for the correct operation of the appliance. Appliances marked by this symbol are not allowed to be disposed of together with the household rubbish.

Cleaning work producing in oily waste water, e.g. washing engines, washing undercarriages etc., may only be performed at washing stations with an oil separator.

Working with detergents may only be performed on watertight surfaces with connection to the waste water sewage system. Do not allow detergent to enter waterways or the soil.

Extraction of water from public waterways is not permitted in some countries.

Current information on content materials can be found at: www.kaercher.de/REACH

Use the high-pressure cleaner in private households only.

The high-pressure cleaner is intended for cleaning machines, vehicles, buildings, tools, façades, terraces, garden machines etc. using a high-pressure water jet.

Only use original accessories and original spare parts. They ensure that the appliance will run fault-free and safely.

Information on accessories and spare parts can be found at www.kaercher.com.

The scope of delivery for the appliance is shown on the packaging. Check the contents for completeness when unpacking. If any accessories are missing or in the event of any shipping damage, please notify your dealer.

The maximum amount of equipment is described in these operating instructions. Depending on the model used, there are differences in the scope of delivery (see packaging).

---

---

1. Stand with carrying handle
2. Water connection with integrated sieve
3. Transport wheel
4. Visor
5. Hose guide
6. Trigger "0/OFF" / "I/ON"
7. Storage for spray lance
8. High-pressure hose
9. *Plug 'n' Clean detergent bottle
10. Storage / parking position for high-pressure gun
11. Transport handle, telescoping
12. Power Control spray lance dirt grinder for stubborn dirt, pressure level: HARD
13. Vario Power Power Control spray lance for the most common cleaning tasks, pressure levels: HARD / MEDIUM / SOFT / MIX
14. Power Control high-pressure gun
15. Button for separating the high-pressure hose from the high-pressure gun
16. High-pressure gun lever
17. Pressure indicator (0-MIX / 1-SOFT / 2-MEDIUM / 3-HARD)
18. High-pressure gun lock
19. Carrying handle
20. Hose holder
21. High pressure hose reel
22. Crank handle for hose reel
23. Type plate
24. Accessory compartment
25. Hook for net attachment
26. Accessory compartment net
27. Mains connection with mains plug
28. Water connection coupling
29. **Garden hose (fabric reinforced, diameter at least 1/2 inch (13 mm), length at least 7.5 m, with commercially available quick coupling)
30. **KÄRCHER suction hose for water supply from open containers (order no. 2.643-100.0)
31. Supplied screws and dowels
32. *Foam nozzle with detergent containerThe detergent is sucked out of the container to produce a strong detergent foam.
33. *Rotating washing brush (e.g. for washing cars)

* optional, ** additionally required

The power switch prevents unintentional operation of the device.

The lock locks the lever of the high-pressure gun and prevents the device from starting unintentionally.

If the lever of the high-pressure gun is released, the pressure switch turns off the pump and the high-pressure jet stops. The pump switches on again when the lever is pressed.

The motor circuit breaker shuts off the device if power consumption it too high.

Place the screws provided and matching screwdriver at the ready.

Fit the supplied loose parts onto the device before starting up the device.

1. Insert the wheels.

   Note

   Pay attention to the alignment of the hole.

   ---

   

2. Secure the wheels with 1 screw each.

1. Insert the stand.

   ---

   

2. Insert the 2 dowels into the holes as far as they will go.

3. Secure the base with 2 screws.

1. Hang the spray lance storage in position.

2. Secure the storage with 2 screws.

   ---

   

3. Secure the cover with 4 screws.

   ---

   

1. Attach the transport handle.

   ---

   

2. Secure the transport handle with 2 screws.

1. Hang the accessory net on the hooks.

   ---

   

1. Insert the high-pressure hose through the hose guide from the rear.

   ---

   

1. Screw the water connection coupling onto the water connection on the device.

   ---

   

1. Place the device on a flat and level surface.

2. For devices with a hose reel: Completely unwind the high-pressure hose from the hose reel.

3. For devices without a hose reel: Unwind the high-pressure hose completely and eliminate any loops and twists.

4. Pull the high-pressure hose all the way forwards through the hose guide.

5. Insert the high-pressure hose into the high-pressure gun until it audibly latches into place.

   Note

   Take care to ensure the correct alignment of the nipple.

   ---

   

6. Check for a secure connection by pulling on the high-pressure hose.

7. Plug the mains plug into a mains socket.

For the connection values, see the type plate or chapter Technical data.

Observe the water distribution company regulations.

1. Plug the garden hose onto the water connection coupling.

2. Connect the garden hose to the water line.

3. Open the water tap fully.

   ---

   

When used with the KÄRCHER suction hose with check valve (special accessory, order number 2.643-100) this high-pressure cleaner is suitable for sucking up surface water, e.g. from rain barrels or ponds (for the maximum suction height see chapter Technical data).

The water connection coupling is not required for vacuuming operation.

1. Fill the suction hose with water.

2. Screw the suction hose onto the device water connection and hang it in a water source (e.g. water butt).

1. Switch the device on "I/ON".

2. Unlock the lever of the high-pressure gun.

3. Press the lever of the high-pressure gun.

   The device switches on.

4. Allow the device for run a maximum of 2 minutes until the water escaping from the high-pressure gun is free of air bubbles.

5. Release the lever of the high-pressure gun.

6. Lock the lever of the high-pressure gun.

The pressure indicator on the high-pressure gun shows the currently set pressure level when operating with a Power Control spray lance.

Display	Pressure level	Recommended for e.g.
	HARD	Stone terraces made of paving stones or washed concrete, asphalt, metal surfaces, garden utensils (wheelbarrow, spade, etc.)
	MEDIUM	Cars / motorcycles, brick surfaces, plastered walls, plastic furniture
	SOFT	Wooden surfaces, bicycle, sandstone surfaces, rattan furniture
	MIX	Operation with detergent

1. Insert a spray lance into the high-pressure gun and lock it by turning it 90°.

   ---

   

2. Switch the device on ("I/ON").

3. Unlock the lever of the high-pressure gun.

4. Press the lever of the high-pressure gun.

   The device switches on.

5. Turn the Vario Power Power Control spray lance until the required pressure level is shown on the pressure indicator.

1. Insert the washing brush into the high-pressure gun and turn by 90° to fasten it.

1. Remove the cover from the Plug ‘n’ Clean detergent bottle.

2. Plug the detergent bottle into the Plug ‘n’ Clean detergent connection with the opening facing down.

   ---

   

3. Use the Vario Power spray lance.

4. Turn the spray lance towards "MIX" until "MIX" is displayed on the high-pressure gun.

   The detergent solution is mixed with the water jet during operation.

5. You can optionally use the foam nozzle.

   1. Fill the detergent solution into the detergent tank. Adhere to the dosage specifications on the detergent container.

   2. Connect the foam nozzle to the detergent container.

   3. Insert the foam nozzle into the high-pressure gun and turn by 90° to fasten it.

      ---

      

1. Spray the detergent sparingly on the dry surface and let it work for a while (do not let it dry).

2. Rinse off the loosened dirt with the high-pressure jet.

1. Pull the Plug ‘n’ Clean detergent bottle out of the mount and close it with the cap before transporting the device lying down.

2. Store the detergent bottle in the holder with the lid facing up.

3. Flush the device with clear water for approx. 30 seconds.

1. Release the lever of the high-pressure gun.

   The device switches off when the lever is released. The high pressure in the system is retained.

2. Lock the lever of the high-pressure gun.

   ---

   

3. Place the high-pressure gun with the spray lance in the parking position.

4. Switch the device off "0/OFF" during work breaks longer than 5 minutes.

1. Release the lever of the high-pressure gun.

2. Close the water tap.

3. Press the lever of the high-pressure gun for 30 seconds.

   The pressure remaining in the system is discharged.

4. Release the lever of the high-pressure gun.

5. Lock the lever of the high-pressure gun.

6. Disconnect the device from the water supply.

7. Switch off the device "0/OFF".

8. Pull the mains plug out of the socket.

1. Lift and carry the device by the carrying handles.

1. Pull the transport handle out until it audibly latches into place.

2. Pull the device via the transport handle.

1. Before transporting lying down, pull the Plug ‘n’ Clean detergent bottle out of the mount and close it with the cap.

2. Secure the device against slipping and tipping over.

1. Place the device on a level surface.

2. Disconnect the spray lance from the high-pressure gun.

3. Press the separation button on the high-pressure gun and disconnect the high-pressure hose from the high-pressure gun.

4. ATTENTION

   Damage to the high-pressure hose

   Damage to the high-pressure hose through incorrect direction of rotation

   Observe the correct direction of rotation of the hose reel when winding on the hose.

   For devices with a hose reel: Use the crank handle to turn the hose reel anticlockwise and coil up the high-pressure hose.

5. For devices without a hose reel: Store the high-pressure hose on the device.

6. Store the mains connection cable and accessories on the device.

Observe the additional instructions before storing the device for a longer period of time, see chapter Care and service.

The following requirements must be satisfied:

• The device is disconnected from the water supply.

• The high-pressure gun is disconnected from the high-pressure hose.

1. Switch the device on "I/ON".

2. Wait for a maximum of 1 minute until no more water escapes from the high-pressure hose.

3. Switch off the device.

4. Store the device in a frost-protected room, together with all accessories.

The device is maintenance-free, i.e. you do not need to perform any maintenance work.

If necessary, clean the sieve in the water connection.

1. Remove the water connection coupling.

2. Pull the sieve out using flat pliers.

3. Clean the sieve under running water.

   ---

   

4. Insert the sieve into the water connection.

Malfunctions often have simple causes that you can remedy yourself using the following overview. When in doubt, or in the case of malfunctions not mentioned here, please contact your authorised Customer Service.

• Device not running 

• The device does not start up, the motor buzzes 

• Device does not reach required pressure 

• Strong pressure fluctuations 

• Device leaking 

• Detergent is not sucked in 

Remedy:

1. Press the lever of the high-pressure gun.

   The device switches on.

2. Check that the voltage specified on the type plate corresponds to the voltage of the power source.

3. Check the mains connection cable for damage.

4. If the motor is overloaded and the motor circuit breaker has triggered:

   1. Switch off the device "0/OFF".

   2. Allow the device to cool down for 1 hour.

   3. Switch the device on "I/ON" and resume operation.

   Have the device checked by Customer Service if this fault occurs repeatedly.

Cause:

Voltage drop due to a weak mains grid or when using an extension cable

Remedy:

1. When switching on, first press the lever on the high-pressure gun and then switch on the device "I/ON".

Cause:

The water supply is too low

Remedy:

1. Open the water tap fully.

2. Check the water inlet for an adequate flow rate.

Cause:

The sieve in the water connection is dirty.

Remedy:

1. Pull the sieve in the water connection out using flat pliers.

2. Clean the sieve under running water.

Cause:

Air is in the device.

Remedy:

1. Vent the device:

   1. Switch on the device without a connected spray lance for a maximum of 2 minutes.

   2. Press the high-pressure gun and wait until the water escaping from the high-pressure gun is free of air bubbles.

   3. Connect the spray lance.

   4. Observe the maximum suction height during suction operation (see chapter Technical data).

Remedy:

1. Clean the high-pressure nozzle:

   1. Use a needle to remove dirt from the nozzle drill.

   2. Rinse the high-pressure nozzle from the front with water.

2. Check the water supply volume.

Remedy:

1. The device leaks a small amount for technical reasons. If the leak is severe, request authorised Customer Service.

Remedy:

1. Use the Vario Power spray lance and turn it to "MIX".

2. Check that the Plug ‘n’ Clean detergent bottle is sitting correctly with the opening facing down in the detergent connection.

The warranty conditions issued by our relevant sales company apply in all countries. We shall remedy possible malfunctions on your appliance within the warranty period free of cost, provided that a material or manufacturing defect is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorised customer service site.

(See overleaf for the address)

• K 4 Premium Power Control 

• K 4 Power Control 

We hereby declare that the machine described below complies with the relevant basic safety and health requirements in the EU Directives, both in its basic design and construction as well as in the version placed in circulation by us. This declaration is invalidated by any changes made to the machine that are not approved by us.

Product: High-pressure cleaner

Type: 1.324-xxx

2000/14/EC

2014/30/EU

2006/42/EC (+2009/127/EC)

2011/65/EU

EN 50581

EN 55014-1: 2017

EN 55014-2: 2015

EN 60335-1

EN 60335-2-79

EN 61000-3-2: 2014

EN 61000-3-3: 2013

EN 62233: 2008

2000/14/EC: Annex V

Measured: 88

Guaranteed: 90

The undersigned act on behalf and under the power of attorney of the company management.

---

Documentation supervisor:

S. Reiser

Alfred Kärcher SE & Co. KG

Alfred-Kärcher-Str. 28 - 40

71364 Winnenden (Germany)

Ph.: +49 7195 14-0

Fax: +49 7195 14-2212

Winnenden, 2019/12/01