Read these original instructions and safety instructions as well the original instructions and safety instructions supplied with the battery pack and charger before using the device for the first time.

Act in accordance with them.

Keep all operating instructions for future reference or for future owners.

In addition to the notes in the operating instructions, you also need to take into consideration the general safety regulations and accident prevention guidelines applicable by law.

The major device information is specified on the type plate.

The location of the type plate on the device is specified in the "Device description" chapter.

Only use the device in private households.

Only use the device with battery packs and chargers from the KÄRCHER Battery Power 4 V system.

	Suitable battery packs are marked with the BP 4 V symbol.
	Only charge the battery pack with the chargers approved for charging.

The battery-powered device is designed for cleaning moist, smooth surfaces such as window panes, mirrors or tiles.

• Do not use the device as a dry vacuum cleaner.

• The device can absorb max. 25 ml fluid from horizontal surfaces, e.g. from a toppled drinking glass.

• Only use the device with the following KÄRCHER detergents: RM 500, RM 503, RM 508.

  Do not use conventional window cleaning agents (no spirit, no foam cleaners, etc.).

• Only use the appliance with accessories and spare parts approved by KÄRCHER.

Any other use is prohibited. The user shall be liable for hazards arising as a result of improper use.

You can find a QR Code^® to call up an application video in:

---

Trademarks

QR-Code^® is a registered trademark of DENSO WAVE INCORPORATED.

The packing materials can be recycled. Please dispose of packaging in accordance with the environmental regulations.

Electrical and electronic appliances contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which - if handled or disposed of incorrectly - can pose a potential threat to human health and the environment. However, these components are required for the correct operation of the appliance. Appliances marked by this symbol are not allowed to be disposed of together with the household rubbish.

Current information on content materials can be found at: www.kaercher.com/REACH

Only use original accessories and original spare parts. They ensure that the appliance will run fault-free and safely.

Information on accessories and spare parts can be found at www.kaercher.com.

The scope of delivery for the appliance is shown on the packaging. Check the contents for completeness when unpacking. If any accessories are missing or in the event of any shipping damage, please notify your dealer.

1. Put the suction nozzle on the separator until it audibly clicks into place.

   ---

   

1. Charge the battery pack (see operating instructions and safety instructions for the battery pack and the charger).

1. Press the battery pack into the battery mount on the device until it you feel it latch into place.

   ---

   

After the device has been switched on, the charging state of the battery pack is displayed.

---

1. Press the ON / OFF button to switch off the device.

2. Press the battery pack unlocking button, and pull the battery pack out of the battery mount.

   ---

   

1. Fit the spray head onto the wiping attachment.

   ---

   

2. Fill the detergent into the spray bottle.

   ---

   

3. Slowly fill clean water into the spray bottle up to the MAX marking.

4. Close the spray bottle.

   ---

   

5. Attach the adapter to the wiping attachment on one side and snap it into place on the other side.

   ---

   

6. Attach the microfibre wipe cover to the adapter.

   ---

   

7. For small areas, disengage and remove the adapter on the wiping attachment.

   ---

   

8. Attach the microfibre wipe cover to the wiping attachment and fold it back to the side.

1. Turn the spray nozzle to "ON".

   ---

   

2. Operate the spray lever several times and spray the detergent evenly onto the surface to be cleaned from a distance of approx. 20 cm.

3. Loosen the dirt with the microfibre wipe cover.

   ---

   

4. Press the ON / OFF button to switch the device on.

   ---

   

   The charge indicator shows the current charging state of the battery pack, see chapter Charge indicator.

5. Pull the squeegee blade over the surface to be cleaned to suck up the waste water.

   ---

   

Observe the following points to prevent streaks appearing:

• Do not press the squeegee blade too hard against the surface to be cleaned, just glide over it.

• Hold the device at the correct angle to the surface to be vacuumed. The distance between the lower end of the device and the surface should be approx. 10 cm.

• Use only KÄRCHER detergents, as these are specially designed for the device.

• Spray a sufficient amount of detergent on the surface so that the surface is not too dry.

• Clean the squeegee blade regularly, see chapter Clean the squeegee blade and suction nozzle.

• If worn, the squeegee blade must be replaced, see chapter Clean the squeegee blade and suction nozzle.

• Do not clean in direct sunlight or when it is too hot or cold.

1. Press the ON / OFF button to switch off the device.

   ---

   

2. Place the device on a level surface.

Empty the waste water tank as soon as it is filled up to the MAX marking.

---

1. Press the ON / OFF button to switch off the device.

   ---

   

2. Remove the waste water tank.

   ---

   

3. Drain the waste water tank and rinse it with clean water.

   ---

   

4. Fit the empty waste water tank into the device.

   ---

   

1. Press the ON / OFF button to switch off the device.

   ---

   

2. Clean the waste water tank, see chapter Cleaning the waste water tank.

3. Remove the battery pack, see chapter Removing the battery pack.

4. Clean the microfibre wipe cover, see chapter Clean the microfibre wipe cover.

5. Clean the squeegee blade and the suction nozzle, see chapter Clean the squeegee blade and suction nozzle.

6. Allow the device to dry.

7. Assemble the device.

8. Charge the battery pack, see operating instructions with safety instructions for the battery pack and the charger.

1. Remove the battery pack, see chapter Removing the battery pack.

2. Secure the device against slipping and tipping over when transporting in vehicles.

1. Remove the battery pack, see chapter Removing the battery pack and store it properly, see the operating instructions for the battery pack.

2. Store the cleaned device upright in a clean, dry place, protected from frost and dust.

   ---

   

1. Empty the waste water tank, see chapter Emptying the waste water tank.

2. Remove the waste water tank lock.

   ---

   

3. Clean the waste water tank and lock by hand.

   ---

   

1. Remove the microfibre wipe cover from the wiping attachment or adapter.

   ---

   

2. Wash the microfibre wipe cover under running water.

3. Alternatively, the microfibre wipe cover can be washed in the washing machine at max. 60°C.

   ---

   

Observe the following care instructions:

• Do not bleach the microfibre wipe cover.

• Do not use fabric softeners.

• Do not dry the microfibre wipe cover in the dryer.

• Do not iron the microfibre wipe cover.

1. Switch off the device.

2. Press the unlocking button at the bottom of the suction nozzle and pull the suction nozzle off the device.

   ---

   

3. Press the unlocking button on the top of the suction nozzle and slide the clamping rail off the suction nozzle.

   ---

   

4. Remove the squeegee blade from the suction nozzle.

5. Clean the squeegee blade, suction nozzle and clamping rail under running water.

   ---

   

6. After drying, insert the squeegee blade into the suction nozzle.

   ---

   

7. Place the clamping rail on the squeegee blade and push it backwards until it audibly engages in the suction nozzle. Make sure that the clamping rail slides sideways correctly into the guides on the suction nozzle.

   ---

   

Malfunctions often have simple causes that you can remedy yourself using the following overview. When in doubt, or in the case of malfunctions not mentioned here, please contact your authorised Customer Service.

As the battery pack ages, even if it is looked after, the battery capacity reduces such that the full run time will no longer be reached when fully charged. This does not indicate a defect.

• The device is not working. 

• The spray bottle is not working. 

• Streaking occurs during operation. 

Cause:

The battery pack is not sitting properly in the device.

Remedy:

1. Push the battery pack into the battery mount on the device until it you feel it latch into place.

Cause:

The charging state of the battery pack is too low.

Remedy:

1. Charge the battery pack, see chapter Battery pack charging.

Cause:

The battery pack is overheated.

Remedy:

1. Take the battery pack out of the device and let it cool down, see chapter Removing the battery pack.

   Note

   The battery pack can get very warm.

2. Do not the place the device and battery pack in direct sunlight.

Cause:

The battery pack or charger is defective.

Remedy:

1. Replace the battery pack or charger, see chapter Intended use.

Cause:

There is no detergent in the spray bottle.

Remedy:

1. Fill the spray bottle with detergent, see chapter Prepare spray bottle.

Cause:

The pump mechanism in the spray head is defective.

Remedy:

1. Contact the service department.

Remedy:

1. To avoid streaking, see chapter Starting operation.

• The device is not working. 

• The spray bottle is not working. 

• Streaking occurs during operation. 

Cause:

The battery pack is not sitting properly in the device.

Remedy:

1. Push the battery pack into the battery mount on the device until it you feel it latch into place.

Cause:

The charging state of the battery pack is too low.

Remedy:

1. Charge the battery pack, see chapter Battery pack charging.

Cause:

The battery pack is overheated.

Remedy:

1. Take the battery pack out of the device and let it cool down, see chapter Removing the battery pack.

   Note

   The battery pack can get very warm.

2. Do not the place the device and battery pack in direct sunlight.

Cause:

The battery pack or charger is defective.

Remedy:

1. Replace the battery pack or charger, see chapter Intended use.

Cause:

There is no detergent in the spray bottle.

Remedy:

1. Fill the spray bottle with detergent, see chapter Prepare spray bottle.

Cause:

The pump mechanism in the spray head is defective.

Remedy:

1. Contact the service department.

Remedy:

1. To avoid streaking, see chapter Starting operation.

The warranty conditions issued by our relevant sales company apply in all countries. We shall remedy possible malfunctions on your appliance within the warranty period free of cost, provided that a material or manufacturing defect is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorised customer service site.

(See overleaf for the address)