WV 6 Premium D500
59698590 (01/22)
59698590 (01/22)
Observe all basic precautions when using the device, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE
For home use only!
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
To reduce the risk of fire, electric shock, or injury:
Disconnect the charger from the mains socket if not in use and before performing maintenance work on the device or charger.
To reduce the risk of electric shock:
Do not expose to rain. Store indoors.
Do not allow to be used as a toy. Close attention is necessary when used by or near children.
Use only as described in this manual. Use only manufacturer’s recommended attachments.
Do not use with damaged battery charger output cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, contact customer service.
Do not pull or carry by the battery charger output cord, do not use battery charger output cord as a handle, do not close a door on the battery charger output cord, or pull battery charger output cord around sharp edges or corners. Do not run appliance over battery charger output cord. Keep battery charger output cord away from heated surfaces.
Prevent unintentional starting. Ensure the switch is in off‑position before picking up or carrying the appliance. Carrying the appliance with your fingers on the switch or energizing appliance that have the switch on invites accidents.
Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
Unless otherwise stated in the instructions for use and care, do not modify or repair the device or the battery.
Do not unplug by pulling battery charger output cord. To unplug, grasp plug.
Do not handle battery charger or appliance with wet hands.
Do not put any objects into openings. Do not use if openings are blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
Use extra care when cleaning on stairs.
Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
Do not charge the unit outdoors.
Use only the charger supplied by the manufacturer to charge the device.
Do not incinerate the device, even if it is severely damaged. The battery could catch fire and explode.
Do not use to pick up toxic material (chlorine bleach, amonia, drain cleaner, etc).
Do not pick up anything that is burning or smoking such as cigarettes, matches, or hot ashes.
Do not immerse. Use only on surfaces moistened by the cleaning process.
Short circuit hazard! Do not insert conductive objects (such as screwdrivers or similar) into the charger plug.
Disconnect the charger from the electrical outlet when not in use as well as before carrying out any maintenance work on the charger or device.
In case of visual damage, replace the charger with original manufacturer suggested parts.
If misused, liquid can leak out of the battery. The escaping liquid can cause skin irritation or burns. Do not touch this. If you accidentally touch it, rinse the affected area with water. If the liquid comes into contact with the eyes, seek medical help.
Do not use a damaged or modified battery or a damaged or modified device. Unpredictable processes can occur in damaged or modified batteries, which can lead to fire, explosions or injuries.
Charge the device using only the charger specified by the manufacturer. When using a charger designed for a specific type of battery, there is a risk of fire if this is used with a different battery.
Follow all charging instructions and only charge the battery or device within the temperature range specified in the instructions. Incorrect charging or charging outside the specified temperature range can damage the battery and increase the risk of fire.
The voltage indicated on the type plate must correspond to the supply voltage.
Do not expose a battery or device to flames or excessive temperatures. Contact with flames or a temperature above 130 °C can lead to explosions.
Only store the charger in dry rooms at an ambient temperature of 41-104 °F (5-40 °C) and only use it under these conditions.
Only store the device in dry rooms at an ambient temperature of 41-104 °F (5-40 °C) and only use it under these conditions.
Never touch the mains plug with wet hands.
Do not make any modifications to the battery.
The battery has been tested in accordance with the relevant regulations for international transport and can be transported / delivered.
The device is equipped with internal thermal protection to protect against overheating. The device switches off when the thermal protection is activated. Upon activation of the thermal protection, proceed as follows:
Switch off the device and unplug the charger from the mains socket.
Check the nozzles and inlet openings for obstructions (clogging). Remove any obstructions if present.
Allow the motor to cool down for 30 minutes. Do not plug in the charger. The thermal protection is deactivated once the motor has cooled down.
You must have the device serviced if the thermal protection does not automatically deactivate after performing this step.
SAVE THESE INSTRUCTIONS
Indication of an imminent threat of danger that will lead to severe injuries or even death.
Indication of a potentially dangerous situation that may lead to severe injuries or even death.
Indication of a potentially dangerous situation that may lead to minor injuries.
Indication of a potentially dangerous situation that may lead to damage to property.
Device type:
1.633-533.0
Use the following charger:
6.654-453.0
Charge the battery only using the original charger enclosed or with a charger approved by KÄRCHER. |
WARNING - To reduce the risk of injury, fire or explosion: Read the instruction manual |
The battery-powered appliance is designed for cleaning moist, smooth surfaces such as windows, mirrors or tiles. Observe the safety instructions.
Never use the device for vacuuming dust.
The device can vacuum up to 0.8 oz (25 ml) of fluid from horizontal surfaces, e.g. from a toppled drinking glass.
Only use the appliance with the following detergents: RM 500, RM 503, RM 508.
Only use the device with accessories and spare parts approved by KÄRCHER.
All uses other than this shall be regarded as not being in accordance with its intended use. The manufacturer is not responsible for any resultant damage; The risk for this is borne by the user alone.
The owner and/or user must have an understanding of the manufacturer’s operating instructions and warnings before using this device
Warning information should be emphasized and understood.
If the operator is not fluent in English, the manufacturer’s instructions and warnings shall be read to and discussed with the operator in the operator’s native language by the purchaser/owner, making sure that the operator comprehends its contents.Owner and/or user must study and maintain for future reference the manufacturer’s instructions.
Your device must be registered in order to help with any questions or issues that you have. You can register your device at www.karcher-register.com if located in the U.S.A., www.karcher/ca if located in Canada, or www.karcher.com/mx if located in Mexico.
In the case of a warranty claim, you can contact customer support. Please see the contact information listed below for either the USA, Canada, or Mexico. You MUST provide your proof of purchase in order to file a warranty claim either via email, phone, or fax.
You can contact our Customer Service department by phone at 1-800-537-4129 or via the website at www.karcher-help.com.
You can contact our Customer Service department by phone at 1-800-465-4980 or via the website at www.karcher.com/ca.
You can contact our Customer Service department by phone at 01-800-024-13-13 or via the website at www.karcher.com/mx.
The scope of delivery for the appliance is shown on the packaging. During unpacking, check the contents for completeness. If any accessories are missing or in the event of any shipping damage, please notify our Customer Service department as stated above either by phone or via the website.
Only use original accessories and original spare parts. They ensure that the appliance will run fault-free and safely.
Information on accessories and spare parts can be found at www.kaercher.com.
Electrical connection | |
Battery type | Li-Ion |
Nominal voltage of battery | 3,65 V |
Nominal voltage of charger | 5,5 V |
Nominal current of charger | 2000 mA |
Charging time for an empty battery | 170 Minutes |
Protection class | IPX4 |
Dimensions and weights | |
Weight | 1,8 (0,8) lbs (kg) |
Waste water tank volume | 5,01 (150) oz (ml) |
Device performance data | |
Nominal power | 10 W |
Operating duration with a fully charged battery | 100 Minutes |
Sound pressure level (EN 60704-2-1) | 52 dB(A) |
Insert the suction nozzle into the separator until the suction nozzle audibly latches into place.
Use the narrow suction nozzle for small narrow surfaces.
The device is supplied with a discharged battery. Fully charge the battery before using the device for the first time.
Plug the charger into a mains socket.
Plug the connecting plug into the charging socket on the device.
The charging process is indicated for approx. 25 min by the status bar running upwards.
The device runtime in minutes that is already available flashes in the LED display.
When the device is fully charged, "100" is shown in the LED display for 60 minutes and then it goes out. The charging process takes more than 170 minutes when charging the device for the first time.
The device is ready for use.
Fit the spray head on the wiping attachment.
Fill 1 cap (approx. 0.68 oz / 20 ml) of detergent into the spray bottle.
Pour clean water slowly into the spray bottle up to the MAX mark.
Close the spray bottle.
Attach the adapter to the wiping attachment on the right and snap it into place on the left.
Fit the microfiber wipe cover on the adapter.
Use the pale microfiber wipe cover indoors and the dark microfiber wipe cover outdoors.
Disengage and remove the adapter on the wiping attachment for small areas.
Attach the microfiber wipe cover to the wiping attachment and fold it back to the side.
Pull the coarse dirt scraper across the wiping attachment to remove heavy soiling (such as dried bird droppings).
Set the spray nozzle to the "ON" position
Press the spray lever and spray the window cleaner evenly onto the surface to be cleaned from a distance of 8 in. (20 cm).
Loosen the dirt using the microfiber wipe cover.
Set the trigger to the "ON" position.
The device switches on.
The remaining run time in minutes is displayed.
Pull the squeegee blade over the surface to be cleaned to vacuum up the waste water.
Only work with the device until the MAX mark of the waste water tank is reached. Switch off the device and empty the waste water tank (see chapter Emptying the waste water tank).
Observe the following points to prevent streaks appearing:
Only glide the squeegee blade over the surface to be cleaned, do not press too hard.
Hold the device at the correct angle to the surface to be vacuumed. The distance between the lower end of the device and the surface should be approx. 4 in. (10 cm).
Use only a KÄRCHER detergent because this is specially developed for use with the device.
Spray a sufficient quantity of window cleaner onto the surface so that it is not too dry.
Clean the squeegee blade regularly (see chapter Cleaning the squeegee blade, suction nozzle and coarse dirt scraper).
Replace the squeegee blade when worn (see chapter Cleaning the squeegee blade, suction nozzle and coarse dirt scraper).
Do not perform cleaning work under direct sunlight or when the weather is too hot.
Set the power switch to "OFF".
The device switches off.
Place the device on a level surface.
Empty the waste water tank when it is filled up to the MAX mark.
Switch off the device.
Remove the waste water tank.
Empty the waste water tank and rinse with clear water.
Insert the waste water tank into the device.
Switch off the device.
Clean the waste water tank (see chapter Cleaning the waste water tank).
Clean the microfiber wipe cover (see chapter Cleaning the microfiber wipe cover).
Clean the squeegee blade, suction nozzle and coarse dirt scraper (see chapter Cleaning the squeegee blade, suction nozzle and coarse dirt scraper).
Allow the device to dry.
Assemble the device.
Charge the battery if necessary (see chapter Battery charging).
Store the cleaned device upright in a clean, dry place that is protected from dust.
Incorrect cleaning
Risk of fire, injury, electric shock
Switch off the device.
Pull the connecting plug out of the charging socket.
Never clean the device under running water.
Empty the waste water tank (see chapter Emptying the waste water tank).
Remove the cap on the waste water tank.
Clean the waste water tank and the cap by hand.
Remove the microfiber wipe cover from the wiping attachment or adapter.
Wash the microfiber wipe cover under running water.
The microfiber wipe cover can be alternatively cleaned in a washing machine at temperatures of up to 140 °F (60 °C).
Observe the following instructions on caring for the device:
Do not use fabric softeners.
Do not bleach the microfiber wipe cover.
Do not dry the microfiber wipe cover in a dryer.
Do not iron the microfiber wipe cover.
Switch off the device.
Press the unlocking button at the bottom of the suction nozzle and pull the suction nozzle off the device.
Press the unlocking button at the top of the suction nozzle and slide the clamping rail off the suction nozzle.
Pull the squeegee blade sideways out of the suction nozzle.
Clean the squeegee blade, suction nozzle, clamping rail and coarse dirt scraper under running water.
Push the squeegee blade into the suction nozzle after drying.
Place the clamping rail on the squeegee blade and push it to the rear until it audibly latches into the suction nozzle. Make sure that the clamping rail slides correctly into the side of the guides on the suction nozzle.
Malfunctions often have simple causes that you can remedy yourself using the following overview. When in doubt, or in the case of malfunctions not mentioned here, please contact your authorized Customer Service.
With increasing aging, the capacity of the battery will decrease even with good care, so that even when fully charged, the full run time is no longer achieved. This is not a defect.
The device is not working
Cause:
The battery is not fully charged.
Remedy:
Charge the battery.
Cause:
The device is defective.
Remedy:
Contact the Service department.
The spray bottle is not working
Cause:
There is no detergent in the spray bottle.
Remedy:
Fill the spray bottle with detergent.
Cause:
The pump mechanism in the spray head is defective.
Remedy:
Contact the Service department.
Remedy:
To prevent the formation of streaks, see chapter Starting operation.
Display | Error description | Error correction |
E1 | Battery temperature too high or too low. |
|
E2 | Suction turbine blocked by too much liquid or solids being sucked in. |
|
E3 | Charging voltage too high. |
|
E4 | Battery voltage < 3 V. |
|
Lo | The battery is discharged. |
|
The device is not working
Cause:
The battery is not fully charged.
Remedy:
Charge the battery.
Cause:
The device is defective.
Remedy:
Contact the Service department.
The spray bottle is not working
Cause:
There is no detergent in the spray bottle.
Remedy:
Fill the spray bottle with detergent.
Cause:
The pump mechanism in the spray head is defective.
Remedy:
Contact the Service department.
Remedy:
To prevent the formation of streaks, see chapter Starting operation.
WARNING | |
This device contains Lithium-Ion rechargeable batteries. The Lithium-Ion batteries must be removed and disposed of in accordance with the applicable federal and state regulations. Please note the following RBRC™ SEAL information. |
THE RBRC SEAL™
The RBRC seal™ (Rechargeable Battery Recycling Corporation) seal on the Li-Ion battery (or rechargeable battery) indicates that KÄRCHER have already paid the costs for recycling the battery (or rechargeable battery) at the end of its service life. In collaboration with KÄRCHER and other battery manufacturers, the RBRC™ has established a program in the USA making it easer to collect used Li-Ion batteries. Help to protect our environment and preserve our natural resources by bringing the used battery to an authorized KÄRCHER Service Center or your local recycling company. RBRC™ is a registered trademark of the Rechargeable Battery Recycling Corporation.
Remove the rechargeable battery from the device before disposal.
Do not throw the battery into a fire or into water.
The device can be recycled because KÄRCHER devices are made of high-quality recyclable materials.
The batteries must be recycled or disposed of in accordance with the local laws and regulations.
2-2-SC-A5-GS-17339