The KÄRCHER Home & Garden app can be used to control smart Kärcher products and access supporting content:

• Product information and operating instructions

• Individual device settings

• Usage statistics

• Tips & tricks

• Online shop and much more

Scan the code with a smartphone to access the Kärcher Home & Garden app and further information.

	WFP 12 (incl. 1 filter bag) 1.024-770.0
	WFP 12 (incl. 3 filter bags) 1.024-771.0

Read these original instructions and the safety instructions chapter before using the device for the first time. Act in accordance with them.

Keep these original instructions for future reference or for future owners.

The packing materials can be recycled. Please dispose of packaging in accordance with the environmental regulations.

Old devices contain valuable, recyclable materials that should be recycled. Therefore, please dispose of old devices using suitable collection systems.

Current information on content materials can be found at: www.kaercher.de/REACH

• The Device is intended for filtering and short-term storage of cold drinking water, see Technical data.

• Filtered drinking water is a food product and must be used within 24 hours.

• The device is not suitable for use with water of unknown origin, sea water or well water. It does not retain salts and minerals.

• Before giving to infants under 6 months of age, boil the filtered drinking water and allow to cool accordingly.

• Persons with immunodeficiencies or immune deficiencies must consult a doctor before use.

• The device is only intended for private use.

Only use original accessories and original spare parts. They ensure that the appliance will run fault-free and safely.

Information on accessories and spare parts can be found at www.kaercher.com.

The scope of delivery for the appliance is shown on the packaging. Check the contents for completeness when unpacking. If any accessories are missing or in the event of any shipping damage, please notify your dealer.

The filter bag contains activated carbon made from coconut shells and softener resin and has undergone a special treatment with silver. In drinking water, the filter bag reduces:

• taste and odour impairing substances suchas heavy metals, copper, lime and chlorine

• the water hardness

and ensures a pure, fresh flavour.

All minerals remain.

The filter bag releases a small amount of silver into the water during use. This corresponds to the WHO guidelines.

1. Clean the device, see Cleaning the device.

2. Allow cold drinking water to flow through the openings of the filter cartridge from below for a few seconds.

   ---

   

3. Unpack the filter bag and insert it into the filter cartridge, see Replacing the filter bag.

   ---

   

4. Insert the filter cartridge into the jug insert and press down lightly.

   ---

   

5. Insert the jug insert into the jug.

   ---

   

6. Set the date for the next filter bag change.

   1. Turn the date ring - starting from the current date - by 1 month.

      The latest possible time for replacing the filter bag can now be read off.

      Change intervals, see Technical data.

   2. Place the jug lid on the jug and press on.

   ---

   

7. Slide the lock forwards.

   ---

   

8. Pour in cold drinking water and wait approx. 5 minutes until it has seeped through the filter bag.

9. Discard the filtered drinking water.

   It can,for example, be used for cleaning purposes or for watering.

10. Pour in cold drinking water again and wait approx. 5 minutes until it has seeped through the filter bag.

11. Discard the filtered drinking water again.

    The filter bag is now conditioned. The device is ready for operation and can be filled, see Operation.

    Note

    Even after conditioning, isolated activated carbon particles may still be present in the filtered drinking water. These are harmless to health and suitable for consumption.

    Alternatively, the water can be discarded until no more activated carbon particles are visible.

1. Slide the lock forwards.

   ---

   

2. Pour in the desired amount of drinking water and wait until it has seeped through the filter bag.

3. Slide the lock to the rear.

4. Hold the device by the handle and pour out the required amount of drinking water.

5. Repeat the filling procedure if necessary.

   Note

   Always keep the filter cartridge covered with drinking water.

6. Lift the device by the handle and carry it carefully so as not to spill any drinking water.

7. WARNING

   Health risk!

   Health risk due to germs.

   Discard the drinking water if it has not been used up within the specified period.

   Avoid exposing the device to direct sunlight and heat: Do not place it,for example, on window sills, next to hobs, kettles or other heat-emitting appliances.

   Switch off the device.

   Note

   It is best to store the filled device in a dark, cool place, such as ina refrigerator.

   Discard the filtered drinking water if it has not been used within 24 hours.

1. Empty the drinking water from the device.

2. Remove the jug insert with the filter cartridge from the jug.

   ---

   

3. Remove the filter cartridge from the jug insert and dispose of the filter bag as residual waste, see Replacing the filter bag.

4. Clean the device, see Cleaning the device.

   Do not insert a new filter bag!

5. Store the device in a location protected from direct sunlight.

Observe the typical filter capacity of the filter bag and the maximum service life of the filter bag and filter cartridge and replace the parts accordingly, see Technical data.

Before care and maintenance of the device:

1. Remove the jug lid.

2. Empty the drinking water from the device.

1. Remove the filter cartridge from the jug insert.

2. Dispose of the filter bag.

   1. Disengage the filter cartridge cover to the side and remove it.

   2. Remove the filter bag from the filter cartridge and dispose of it as residual waste.

   ---

   

3. Clean all parts of the device, see Cleaning the device.

4. Replace the filter bag:

   1. Insert the new filter bag into the filter cartridge.

   2. Insert the filter cartridge cover into the filter cartridge and snap it into place to the side.

   Note

   Only remove new filter bags from the original packaging immediately before use.

   ---

   

5. Condition the filter bag, see Operation.

1. Dispose of the used filter cartridge, the filter cartridge lid and the filter bag as residual waste.

   ---

   

2. Allow cold drinking water to flow through the openings of the new filter cartridge from below for a few seconds.

   Note

   Only remove new filter cartridges and filter bags from the original packaging immediately before use.

   ---

   

3. Replace the filter bag, see Replacing the filter bag.

1. Dismantle the device.

2. Remove the filter bag from the filter cartridge, see Replacing the filter bag.

   Note

   Use the date ring to check whether the filter bag needs to be replaced after cleaning the device or whether it can be reused.

3. ATTENTION

   Risk of damage!

   Damage to the device due to incorrect detergents / utensils / methods.

   Only use suitable, commercially available dishwashing detergents and no abrasive or aggressive detergents.

   When cleaning by hand, only use soft, clean cloths and no abrasive sponges or similar.

   Observe the maximum water temperature permitted for cleaning, see Technical data.

   ATTENTION

   Risk of damage!

   Damage to the jug lid or filter bag due to incorrect cleaning.

   The jug lid is not dishwasher-safe. Do not clean it in a dishwasher, but only by hand.

   The filter bags must not be cleaned. Replace dirty or used filter bags.

   Clean the following parts in a dishwasher or by hand:

   • Jug

   • Handle with handle cover

   • Jug insert

   • Filter cartridge without filter bag

   • Filter cartridge cover

   ---

   

4. Clean the jug lid by hand.

5. Dry the individual parts.

6. If necessary, the handle cover can be removed to remove residual moisture:

   1. Insert a tablespoon into the recess at the bottom of the handle cover.

   2. Carefully lever off the handle cover on the handle.

   3. Release the handle cover from the remaining latching hooks and remove.

   ---

   

   Installation information

   Fit the handle cover so that the recess is at the bottom.

7. Assemble the device, see Initial startup.

You can remedy minor faults using the following overview.

If in any doubt, please contact your authorised Customer Service.

• The filter performance is too low 

• The filter performance is too high 

• The filtered water is impaired (taste / odour / appearance) 

• Device damaged or leaking 

• Deposits (edges / stripes / discolouration) 

• Matt spots / scratches 

Cause:

a) The filter capacity is exhausted.

b) The openings of the filter cartridge are dirty / clogged.

c) Hot drinking water has been filled in.

Remedy:

1. Discard the drinking water.

2. Clean the filter cartridge, see Cleaning the device.

3. Replace the filter bag, see Replacing the filter bag.

Cause:

Channel formation in the filter bag.

Remedy:

1. Knead the filter bag and insert it into the filter cartridge with pressure.

Cause:

a) The filter capacity is exhausted.

b) The drinking water was held for too long.

c) A liquid other than drinking water has been filled in.

Remedy:

1. Discard the drinking water or the filled liquid.

2. Clean the device, see Cleaning the device.

3. Replace the filter bag, see (→).

Cause:

The filter bag is not inserted correctly into the filter cartridge. Water runs unfiltered into the jug.

Remedy:

1. Insert the filter bag correctly, see Replacing the filter bag.

Cause:

No filter bag is inserted in the filter cartridge. Water runs unfiltered into the jug.

Remedy:

1. Insert a filter bag, see Replacing the filter bag.

Cause:

Channel formation in the filter bag.

Remedy:

1. Knead the filter bag and insert it into the filter cartridge with pressure.

Cause:

Jug or parts of the device are damaged,for example, due to falling or improper handling.

Remedy:

1. Replace a damaged device immediately, otherwise there is a risk of injury and plastic parts may get into the drinking water.

Cause:

The device was cleaned too rarely.

Remedy:

1. Clean the device, see Cleaning the device.

Cause:

Incorrect detergents / utensils / methods were used.

Remedy:

1. To clean the device properly, see Cleaning the device.

The warranty conditions issued by our relevant sales company apply in all countries. We shall remedy possible malfunctions on your appliance within the warranty period free of cost, provided that a material or manufacturing flaw is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorised customer service site.

Further information can be found at: www.kaercher.com/dealersearch

Further warranty information (if available) can be found in the service area of your local Kärcher website under "Downloads".