K 4K 5

59804250 (09/25)

59804250 (09/25)
With the KÄRCHER Home & Garden app, you benefit from the following advantages when using your device:
Application tips & expert knowledge
Product information, overview of accessories and operating instructions
Support and service contact
Online shop - exclusive offers and much more
Download the KÄRCHER Home & Garden app from your app store and conveniently register your product.
Read and follow these original operating instructions and the enclosed safety instructions chapter before using the device for the first time. Proceed accordingly.
Keep the original operating instructions for future reference or for future owners.
Your device must be registered in order to help with any questions or issues that you have. You can register your device at www.karcher-register.com if located in the U.S.A., www.karcher.com/ca if located in Canada, or www.karcher.com/mx if located in Mexico.
In the case of a warranty claim, you can contact customer support. Please see the contact information listed below for either the USA, Canada or Mexico. You MUST provide your proof of purchase in order to file a warranty claim either via e-mail, phone or fax.
You can contact our Customer Service department by phone at 1-800-537-4129 or via the website at www.karcher-help.com.
You can contact our Customer Service department by phone at 1-800-465-4980 or via the website at www.karcher.com/ca/support.
You can contact our Customer Service department by phone at 01-800-024-1313 or via the website at www.karcher.com/mx.
Indication of an imminent threat of danger that will lead to severe injuries or even death.
Indication of a potentially dangerous situation that may lead to severe injuries or even death.
Indication of a potentially dangerous situation that may lead to minor injuries.
Indication of a potentially dangerous situation that may lead to damage to property.
Risk of asphyxiation. Keep packaging film out of the reach of children.
Operation in explosive atmospheres is prohibited.
When using this product basic precautions should always be followed, including the following:
Read all the instructions before using the product.
High pressure cleaners must not be used by children or untrained personnel.
This device is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the device by a person responsible for their safety.
Children should be supervised by a responsible person to ensure that they do not play with the device.
To reduce the risk of injury, close supervision is necessary when a product is used near children.
Know how to stop the product and bleed pressures quickly. Be thoroughly familiar with the controls.
Stay alert, watch what you are doing and use common sense when operating the product.
Do not operate the product when fatigued or under the influence of drugs, alcohol or medication.
Keep children and bystanders away while operating the product. Distractions can cause you to lose control.
Do not overreach or stand on unstable support. Keep proper footing and balance at all times.This enables better control of the product in unexpected situations.
Follow the maintenance instructions specified in the manual.
This product is provided with a Class A Ground Fault Circuit Interrupter built into the power cord plug. If replacement of the plug or cord is needed, use only identical replacement parts that include Class A GFCI protection.
Do not use the device if a supply cord or important parts of the machine are damaged, e.g. safety devices, high pressure hoses, trigger gun.
To avoid any possible danger, a damaged mains connection cable must be immediately replaced by the manufacturer, or the authorised customer service department or a qualified electrician.
The plug must be plugged into an appropriate outlet that is properly installed by a qualified electrician and grounded in accordance with all local codes and ordinances.
This high-pressure washer should never be powered on or operated in any capacity without first being fully and completely connected with all parts pursuant to the instructions described in the Operator's Manual. Removal of the spray gun prior to or during use can cause serious injury and damage.
This device is capable of producing high pressure (values see Technical data). To avoid rupture and injury, do not operate this device with components rated less than these values (including but not limited to spray guns, hose and hose connections).
If connection is made to a potable water system, the system has to be protected against back flow.
Water that has flowed through a back-flow preventer is considered to be non-potable.
Risk of injection or injury – Do not direct discharge stream at persons or animals.
High-pressure jets can be dangerous if misused. The jet must not be directed at persons, animals, electrical devices, or the product itself.
The high-pressure jet must not be directed at other persons or the user themself to clean clothing or footwear.
High-pressure hoses, fixtures and couplings are important for the safety of the product. Only use high-pressure hoses, fixtures and couplings recommended by the manufacturer.
Risk of eye injury – Spray can splash back or propel objects. Always wear properly rated eye protection such as safety goggles or face shield while spraying. (Safety glasses do not provide full protection.)
During use of high pressure cleaners, aerosols may be formed. Inhalation of aerosols can be hazardous to health.
Depending on the application, shielded nozzles can be used for high pressure cleaning, which will reduce the emission of hydrous aerosols dramatically. However, not all applications allow the use of such a device. If shielded nozzles are not applicable for the protection against aerosols, a respiratory mask of class FFP 2 or equivalent may be needed, depending on the cleaning environment.
Before servicing or cleaning the product or removing any parts, shut off power, pull out the power plug and relieve pressure.
This device has been designed for use with cleaning detergents supplied or recommended by the manufacturer. The use of other cleaning detergents or chemicals may adversely affect the safety and operation of the device and void the warranty.
Risk of explosion – Do not spray flammable liquids.
Do not use acids, alkaline, solvents or any flammable or toxic liquids or material in this device. These products can cause physical injuries to the operator and irreversible damage to the device.
Risk of electrocution – Inspect cord before using. Do not use if cord is damaged.Immediately have damaged cord replaced by an authorized customer service / electrician.
Keep all connections dry and off the ground.
Do not touch plug with wet hands.
Do not spray electrical apparatus and wiring.
Do not use extension cord with this product.
Connect to individual branch circuit only.
Gun kicks back – hold with both hands. The emitted water jet results in a repulsion power acting on the high pressure gun. Make sure that you have a firm footing and are also holding the high pressure gun and spray lance firmly.
The trigger gun safety lock prevents the spray from accidentally being engaged. This safety feature DOES NOT lock spray in the ON position.
This electric pressure washer is equipped with a Class A ground-fault circuit-interrupter (GFCI) built into the plug of the power supply cord. This device provides additional protection from the risk of electric shock.
The Consumer Product Safety Commission recommends that you test all GFCI's once a month. Since the frequency of pressure washer use varies, we recommend that you test the GFCI as part of your startup procedure each time you use your pressure washer. It might need to be reset before working with the pressure washer. To learn how to perform the GFCI test and how to reset it, visit http://www.karcher-help.com and search for GFCI for further instructions.
DO NOT USE IF GFCI FAILS TEST.

NOTE: The actual appearance of the GFCI may be different from this illustration.
When connecting the water inlet with the water supply mains, local regulations of your water company must be observed.
In some areas the unit must not be connected directly to the public drinking water supply. This is to ensure that there is no feedback of chemicals into the water supply.
Direct connection via a receiver tank or back-flow preventer, for example, is permitted.Dirt in the feed water will damage the unit. To avoid this risk, we recommend fitting a water filter.
Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, gasoline, oil etc.
Always prevent debris from being drawn into the unit by using a clean water source.
In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated product, nor should a means for grounding be added to the product. Servicing a double-insulated product requires extreme care and knowledge of the system, and should be done only by qualified service personnel. Replacement parts for a double-insulated product must be identical to the parts they replace.
The owner and/or user must have an understanding of the manufacturer’s operating instructions and warnings before using this pressure washer.
Warning information should be emphasized and understood.
If the operator is not fluent in English, the manufacturer’s instructions and warnings shall be read to and discussed with the operator in the operator’s native language by the purchaser/owner, making sure that the operator comprehends its contents.
Owner and/or user must study and maintain the manufacturers’ instructions for future reference.
Danger of injury!
Serious injuries due to missing, modified or ineffective safety devices.
Do not bypass or remove the safety devices and do not render them ineffective. Safety devices are provided for your own protection.The power switch stops you from operating the device unintentionally.
The latch can be used to lock the trigger of the high-pressure gun. Unintentional starting of the device is prevented by locking the trigger.

If the lever on the high-pressure gun is released, the pressure switch switches the pump off and the high-pressure jet stops. If the lever is pressed, the pump switches on again.
![]() | Do not point the high-pressure jet at people, animals, live electrical equipment or at the device itself. Protect the device from frost. |
![]() | The device may not be connected directly to the public drinking water network. |
![]() | The device is double insulated (protection class II). |
For home use only!
The high-pressure cleaner is designed for cleaning machines, vehicles, structures, tools, facades, terraces, garden tools, etc. with high-pressure water streams.
Only use original accessories and original spare parts. They ensure that the appliance will run fault-free and safely.
Information on accessories and spare parts can be found at www.kaercher.com.
The scope of delivery for the appliance is shown on the packaging. During unpacking, check the contents for completeness. If any accessories are missing or in the event of any shipping damage, please notify your dealer.
The packing materials can be recycled. Please dispose of packaging in accordance with the environmental regulations.
Electrical and electronic appliances contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which - if handled or disposed of incorrectly - can pose a potential threat to human health and the environment. However, these components are required for the correct operation of the device. Appliances marked by this symbol are not allowed to be disposed of together with the household rubbish.
Cleaning work that produces oily waste water,e.g. engine washing, underbody washing, may only be carried out at washing stations with oil separators.
Work with detergents may only be carried out on liquid-tight work areas with a connection to the sewage system. Do not allow detergents to penetrate water or soil.
The extraction of water from public waters is not allowed in some countries.
Current information on content materials can be found at: www.kaercher.de/REACH
Illustrations are examples, details may vary

* additionally required
** optional
Before initial startup, mount the loose enclosed parts on the device.
Have the included screws and the appropriate screwdriver ready.
Attach the transport handle on the device and secure it with 4 screws.

Insert the high-pressure hose power cable holder into the holder on the device and secure it with 1 screw.

Insert the high-pressure gun holder into the mount on the device and secure it with 1 screw.

Insert the accessory holder into the mount on the device and secure it with 1 screw.

The high-pressure cleaner must never be switched on or operated without first having fully connected all parts in accordance with the instructions in the operating manual. Removing the high-pressure gun before or during use can lead to serious injury and damage.

Unwind the power cord completely.
Insert the mains plug into a mains socket, see GROUND FAULT CIRCUIT INTERRUPTER PROTECTION.
Place the device on a level, horizontal surface.
Risk of injury and damage from the high-pressure water jet
Fatal or severe injuries and material damage
A high-pressure water jet may escape from components under high pressure. Depressurize the device before releasing, removing or installing the high-pressure hose or the high-pressure gun.Lock the trigger before releasing, removing or installing the jet nozzle or spray wand.Risk of damage during operation with wound-up high-pressure hose!
Damage to the high-pressure hose.
Unwind the high-pressure hose completely and lay it out without knots, loops or twists before operating the device.Unwind the high-pressure hose completely and lay it out without knots, loops, twists or kinks.
Fit the high-pressure hose into the high-pressure connection and hand-tighten the union nut.

Fit the high-pressure hose into the high-pressure gun and hand-tighten the union nut.

Fit the spray wand into the high-pressure gun and hand-tighten the union nut.

Select the jet nozzle suitable for the cleaning task.
Low-pressure jet:
Black jet nozzle (SOAP)
For applying detergents and working at low pressure.
High-pressure jet:
White jet nozzle, 40° jet angle
For light soiling on large surfaces and working at moderate pressure.
Green jet nozzle, 25° jet angle
For heavier soiling on large surfaces and working at high pressure.
Turbo Nozzle
For the most stubborn dirt, work with maximum pressure and a rotary jet (dirt grinder).
Lock the trigger.
Mount a jet nozzle on the spray wand:
Pull back the ring on the jet nozzle coupling and
fit the jet nozzle into the jet nozzle coupling.
Push the ring forwards.

Pull the jet nozzle to check that it is correctly seated. Repeat the installation if necessary.
Risk of damage through contaminated water!
Contamination in the water can damage the high-pressure pump and accessories.
Operate the device only with clear fresh water without contamination or additives.Never use contaminated water, waste water or salt water.Kärcher recommends using the optional Kärcher water filter.Check the pressure, temperature and quantity of the supply water for compliance with the requirements, see Technical data.
Observe the water distribution company regulations.
A fabric-reinforced garden hose is required, with a minimum diameter of 1/2 inch (13 mm) and a minimum length of 7.5 m.
Screw the garden hose onto the water connection coupling.

Connect the garden hose to the tap.
Open the water tap completely.
This device with the KÄRCHER suction hose is suitable for sucking water frome.g. water butts or ponds (for maximum suction height, see Technical data).
Unscrew the coupling on the water connection.
Fill the KÄRCHER suction hose with water.
Screw the KÄRCHER suction hose onto the water connection of the device and hang it in a water source.
Risk of damage due to dry running of the high-pressure pump!
Material damage
Switch off the device if it does not build up pressure within 2 min and proceed according to the instructions in Troubleshooting guide.Remove the jet nozzle or the foam cannon on the spray lance.
Switch on the device “I/ON”.
Unlocking the trigger.
Actuate the trigger.
The device switches on.
Operate the device for a maximum of 2 minutes until the water flows bubble-free at the jet nozzle coupling.
Release the trigger.
Lock the trigger.
Mount the preferred jet nozzle or the foam cannon on the spray lance.
Risk of damage due to dry running of the high-pressure pump!
Material damage
Switch off the device if it does not build up pressure within 2 min and proceed according to the instructions in Troubleshooting guide.Risk of damage if the device is not positioned correctly.
Damage to the high-pressure pump
Only operate the device in an upright (vertical) position.Switch on the device “I/ON”.
Unlocking the trigger.
Risk of damage due to insufficient jet nozzle distance
Material damage
Always keep a sufficiently large spray distance from sensitive or painted surfaces.Do not remain in one area, but rather keep the high-pressure gun moving.Do not clean car tires, paint or delicate surfaces,e.g. wood, with the jet nozzle using a spot or rotary jet.First test the cleaning effect on an inconspicuous spot.Pull the trigger and carry out the cleaning process.
Health hazards due to detergents!
Serious damage to health
Observe the detergent manufacturer's safety data sheet.Wear the prescribed personal protective gear.Risk of damage from unsuitable detergents!
Material damage
Only use detergents that have been approved by Kärcher and are suitable for the objects to be cleaned.Observe the safety instructions, dosage recommendations and notes enclosed with the detergents.Use detergents sparingly.Risk of damage due to detergents acting too long and drying out!
Material damage
Do not apply detergent to hot surfaces and observe the maximum contact time.Do not allow detergent to dry on the surfaces being cleaned.KÄRCHER detergents ensure fault-free, effective operation. Please ask us for advice and observe our catalog or our detergent information sheets.
Suctioning detergent
Pull the detergent hose out of the device to the desired length and place it into a container with detergent solution.

Lock the trigger.
Mount the black jet nozzle (SOAP) on the spray wand.
Applying detergent with the foam cannon
Optionally use the foam cannon:
Fill the detergent container with detergent solution.
Mount the foam cannon on the spray wand.

Unlock the trigger.
Pull the trigger and spray the detergent sparingly onto the dry surfaces.
Allow the detergent to act (not to dry).
Mount a suitable jet nozzle on the spray wand and rinse off the loosened dirt.
Risk of damage due to dried detergent!
Material damage and malfunctions
Rinse detergents completely from the device and accessories immediately after use.Rinse the device or foam cannon with clean water for approx. 30 seconds.
Release the trigger.
The device stops. The high-pressure in the system is maintained.
Lock the trigger.
For work breaks longer than 5 minutes, switch off the device.
Risk of injury from escaping water under high pressure!
Injuries
Only disconnect the high-pressure hose from the high-pressure gun or the device if there is no pressure in the system.Release the trigger.
Close the water tap.
Actuate the trigger for 30 seconds.
The pressure in the system is released.
Release the trigger.
Lock the trigger.
Switch off the device.
Disconnect the device from the water supply.
Pull the mains plug out of the mains socket.
Risk of injury or damage due to the weight of the device!
Injury and damage.
Be aware of the weight of the device during transport and storage.Pulling/pushing the device
Grasp the transport handle, tilt the device onto the wheels and pull or push it.
Transporting the device in a vehicle
Secure the device against slipping and tipping over.
Risk of injury or damage due to the weight of the device!
Injury and damage.
Be aware of the weight of the device during transport and storage.Observe the additional notes before storing the device for a long period of time, see Care and maintenance.
Finish operation, see Ending operation.
If there is a risk of frost, drain the device and accessories completely, see Freezing protection.
Disconnect the high-pressure hose from the high-pressure gun and the high-pressure connection, and store it on the high-pressure hose / power cable holder.
Store the power cable on the high-pressure hose power cable holder.
Remove the spray wand from the high-pressure gun.
Stowing the accessories:
Engage the spray lance in the accessory holder.
Store the jet nozzles in the accessory holder.
Place the high-pressure gun in the high-pressure gun holder.
Store the device and accessories in a frost-protected interior space.
Risk of damage due to frost!
Material damage
Empty the water completely from the device and accessories.Always protect the device and accessories from frost.Finish operation, see Ending operation.
Leave the mains plug in the mains socket.
Switch the device on.
Wait a maximum of 1 minute until no more water comes out.
Switch off the device.
Drain the water from the accessories.
Pull the mains plug out of the mains socket.
Store the device and accessories in a frost-protected space.
Danger of death!
Fatal injuries due to electric shock when touching live parts.
Do not touch any live parts.Switch off the device.Pull the mains plug out of the mains socket.The device is maintenance-free, i.e. you do not need to perform periodic maintenance work.
Risk of damage due to missing or damaged sieve!
Damage to the high-pressure pump
Do not operate the device without a sieve.Do not clean the sieve with hard, pointed objects.Clean the sieve in the water connection if necessary.
Unscrew the coupling for the water connection from the water connection of the device.

Pull out the sieve.

Clean the sieve under running water.
Insert the sieve into the water connection.
Screw the coupling for the water connection onto the water connection of the device.
Clean the detergent filter before prolonged storage.
Remove the detergent filter from the detergent hose.

Clean the detergent filter under running water.
Malfunctions often have simple causes that you can remedy yourself using the following overview. When in doubt, or in the case of malfunctions not mentioned here, please contact your authorized Customer Service.
Danger of death!
Fatal injuries due to electric shock when touching live parts.
Do not touch any live parts.Switch off the device.Pull the mains plug out of the mains socket.Device is not running
Cause:
The voltage supply is interrupted.
Remedy:
Check whether the GFCI has triggered.
Switch on the device “I/ON”.
Unlock and actuate the trigger.
Check if the voltage specified on the type plate matches the voltage of the power source.
Unplug the mains plug and check the power cord for damage.
A damaged power cord must be replaced promptly by an authorized Customer Service.
The device does not reach required pressure
Cause:
The water supply is too low.
Remedy:
Open the water tap completely.
Lay the garden hose without kinks.
Check the water supply quantity and increase if necessary, see Technical data.
Make sure that the maximum suction height is not exceeded.
Cause:
The sieve is contaminated.
Remedy:
Clean the sieve, see Clean the sieve in the water connection.
Cause:
There is air in the device.
Remedy:
Ensure that the high-pressure hose and garden hose are installed correctly.
Strong pressure fluctuations
Cause:
The jet nozzle is dirty.
Remedy:
Remove the spray nozzle and clean it from the front using a needle, then flush it through.
Cause:
The water supply quantity is too low.
Remedy:
Open the water tap completely.
Lay the garden hose without kinks.
Clean the sieve in the water connection.
Check the water supply quantity and increase if necessary, see Technical data.
Device leaking
Cause:
Minor leakage due to technical reasons.
Remedy:
Minor leakage of the device can occur due to technical reasons and is not a cause for concern.
Cause:
Major leakage.
Remedy:
Contact the authorized Customer Service.
Detergent is not sucked in
Cause:
A high-pressure jet nozzle is mounted.
Remedy:
Install the black low pressure stream jet nozzle (SOAP) on the spray wand.
Cause:
The detergent hose is kinked, blocked or leaking.
Remedy:
Route the detergent hose without kinks, clean it or have it replaced.
Cause:
The detergent filter is blocked.
Remedy:
Clean the detergent filter.
Electrical connection | |
Voltage | 120 V |
Phase | 1 ~ |
Frequency | 60 Hz |
Connection output | 1.49 kW |
Protection class | IPX5 |
Protection class | II ![]() |
Power protection (slow-blowing) | 15 A |
Water connection | |
Feed pressure (max.) | 1.2175 MPapsi |
Input temperature (max.) | 40104 °C°F |
Input amount (min.) | 82.1 l/mingpm |
Suction height (max.) | 0.5 m |
Device performance data | |
Operating pressure | 12.41800 MPapsi |
Max. permissable pressure | 18.62700 MPapsi |
Water flow rate | 4.51.2 l/mingpm |
Hand-arm vibration value | 1.2 m/s2 |
Uncertainty K | 0.6 m/s2 |
Sound pressure level LpA | 75 dB(A) |
Uncertainty KpA | 3 dB(A) |
High-pressure gun recoil force | 12 N |
Dimensions and weights | |
Typical operating weight | 6.8 kg |
Length | 298 mm |
Width | 346 mm |
Height | 848 mm |
Electrical connection | |
Voltage | 120 V |
Phase | 1 ~ |
Frequency | 60 Hz |
Connection output | 1.49 kW |
Protection class | IPX5 |
Protection class | II ![]() |
Power protection (slow-blowing) | 15 A |
Water connection | |
Feed pressure (max.) | 1.2175 MPapsi |
Input temperature (max.) | 40104 °C°F |
Input amount (min.) | 82.1 l/mingpm |
Suction height (max.) | 0.5 m |
Device performance data | |
Operating pressure | 12.41800 MPapsi |
Max. permissable pressure | 18.62700 MPapsi |
Water flow rate | 4.51.2 l/mingpm |
Hand-arm vibration value | 1.2 m/s2 |
Uncertainty K | 0.6 m/s2 |
Sound pressure level LpA | 75 dB(A) |
Uncertainty KpA | 3 dB(A) |
High-pressure gun recoil force | 12 N |
Dimensions and weights | |
Typical operating weight | 7.4 kg |
Length | 298 mm |
Width | 346 mm |
Height | 848 mm |

2-2-SC-A5-GS-17339