LogoVCS 5-28 Infinity
  • General notes
  • Safety instructions for battery-operated vacuum
    • Hazard levels
    • General safety instructions
    • Charger safety instructions
      • Symbols on the charger
    • Battery/battery pack safety instructions
      • Symbols on the battery pack
      • Safety instructions for transportation
  • Intended use
  • Environmental protection
  • Accessories and spare parts
  • Warranty
  • Scope of delivery
  • Charger
  • Device description
  • Installing the wall bracket
  • Installing the free-standing storage station with charging function
  • Initial startup
    • Installing accessories
    • Inserting the battery
    • Removing the battery
    • Charging the battery
  • Operation
    • Vacuuming
    • Ending operation
  • How to use the Accessories
    • General application instructions
    • Motor-driven multi-function floor nozzle with LED
    • Crevice nozzle
    • Furniture brush
    • Mini turbo nozzle
    • Upholstery nozzle
    • Kinkable suction pipe
    • Accessory holder
    • Flexible extension hose
  • Transportation
  • Storage
  • Care and service
    • Clean the pre-filter, fine filter and dust container
    • Cleaning and checking the suction channel
    • Cleaning the exhaust filter
    • Cleaning the motorised floor nozzle
    • Cleaning the mini turbo nozzle
  • TEMPLATE TROUBLESHOOTING-TABLE
  • Troubleshooting guide
    • LED displays
      • Suction force decreases
      • The device does not start up

      • The battery is not charging

      • Charging time is changed
      • Dust container cannot be inserted.
      • Abnormal engine noise

    • Functional malfunctions
      • Suction force decreases
      • The device does not start up

      • The battery is not charging

      • Charging time is changed
      • Dust container cannot be inserted.
      • Abnormal engine noise

  • Technical data

      VCS 5-28 Infinity

      97797290 (03/26)

      General notes

      Before using the device for the first time, read the original instructions, the enclosed safety instructions for battery-powered vacuums, and the safety instructions supplied with the battery pack. Proceed accordingly.

      Keep both books for future reference or for future owners.

      Safety instructions for battery-operated vacuum

      Read these safety instructions and the original instructions before using the device for the first time. Act in accordance with them. Keep the two booklets for future reference or for future owners.

      • In addition to the notes in the operating instructions, you also need to take into consideration the general safety regulations and accident prevention guidelines applicable by law.

      • Warnings and information notices attached to the device provide important information for hazard-free operation.

      • The battery/battery pack is either permanently installed or removable, depending on the device type. Permanently installed batteries/battery packs must not be replaced. Please refer to the operating instructions of the device to find out what applies to your device.

      A battery consists of a single storage element, whereas a battery pack consists of interconnected storage elements.

      In the following chapters, both terms are used synonymously.

      Hazard levels

      DANGER

      Indication of an imminent threat of danger that will lead to severe injuries or even death.

      WARNING

      Indication of a potentially dangerous situation that may lead to severe injuries or even death.

      CAUTION

      Indication of a potentially dangerous situation that may lead to minor injuries.

      ATTENTION

      Indication of a potentially dangerous situation that may lead to damage to property.

      General safety instructions

      DANGER

      Risk of asphyxiation. Keep packaging film out of the reach of children.

      DANGER

      Operation in explosive atmospheres is prohibited.

      DANGER

      Risk of explosion

      • Never use the device to vacuum up combustible gases, liquids or dusts.

      • Never use the device to vacuum up reactive metal dusts (e.g. aluminium, magnesium, zinc).

      • Never use the device to vacuum up undiluted brine or acids.

      • Never use the device to vacuum up any burning or smouldering objects/matter.

      These substances can corrode the materials in use on the device.

      WARNING

      Only use the device for its proper use. Take into account the local conditions and beware of third parties, in particular children, when working with the device.

      WARNING

      Persons with reduced physical, sensory or mental capabilities and persons lacking experience and knowledge may only use the appliance if they are properly supervised, have been instructed on use of the appliance safely by a person responsible for their safety, and understand the resultant hazards involved.

      WARNING

      Only people who have been instructed on how to use the device, or have proven their ability to operate it, and have been explicitly instructed to use it, must use the device.

      WARNING

      Children must not operate the device.

      WARNING

      Children from the minimum age of 8 may use the appliance if they are properly supervised or have been instructed in its use by a person responsible for their safety, and if they have understood the resultant hazards involved.

      WARNING

      Children must be supervised to prevent them from playing with the appliance.

      WARNING

      Children may only perform cleaning work and user maintenance under supervision.

      WARNING

      Adhere to the respective safety regulations in hazard zones (e.g. service stations). Never operate the device in explosive spaces.

      WARNING

      Only use the device for its proper use. Take into account the local conditions and beware of third parties, in particular children, when working with the device.

      WARNING

      The appliance contains electrical components - do not clean the appliance under running water.

      WARNING

      Risk of injury. Do not use the nozzle and suction pipe at head height.

      WARNING

      Avoid switching the device on unintentionally. Make sure that the on/off switch is in the off position before connecting the battery pack, lifting or carrying the device.

      WARNING

      You must not charge or store the device outdoors or in a car.

      CAUTION

      Safety devices are provided for your own protection. Never modify or bypass safety devices.

      CAUTION

      Do not use the appliance if it has been dropped beforehand, is visibly damaged or if it is leaking.

      CAUTION

      Never leave the device unsupervised while it is in operation.

      CAUTION

      Only operate or store the device in accordance with the description or figure.

      CAUTION

      In order to prevent accidents or injuries, you must observe the weight of the device when transporting it.

      CAUTION

      Accidents or damage due to the device falling over. Before all actions with or on the device, you must make sure that it is stable.

      CAUTION

      Do not make any changes to the device, and only use accessories and spare parts recommended by the manufacturer.

      CAUTION

      Risk of injury when loose fitting clothing, hair or jewellery is caught by moving parts of the device. Keep clothing and jewellery away from moving parts of the device. Tie long hair back.

      ATTENTION

      Do not operate the device at temperatures below 0 °C.

      ATTENTION

      Never use the device without a filter, this can lead to device damage.

      ATTENTION

      Only use the device indoors.

      Charger safety instructions

      DANGER

      Never touch the mains plug and socket with wet hands.

      DANGER

      Danger of explosion. Do not charge any non-rechargeable battery.

      DANGER

      Do not charge the battery pack in an explosion-hazard environment.

      DANGER

      Never insert conductive objects, e.g. screwdrivers or similar, into the charging socket on the appliance.

      WARNING

      Only charge the appliance using the original charger enclosed or with a charger approved by KÄRCHER.

      WARNING

      Protect the power cable from heat, sharp edges, oil and moving parts.

      WARNING

      Do not open the charger. Repairs are only to be carried out by qualified personnel.

      WARNING

      Only use the charger for charging approved battery packs.

      WARNING

      Immediately replace a damaged charger together with charging cable with an original part.

      WARNING

      The appliance contains electrical components - do not clean the appliance under running water.

      WARNING

      You may not charge the battery pack for longer than 24 hours without interruption.

      CAUTION

      Do not use the battery pack when dirty or wet.

      CAUTION

      Keep the charger ventilation slits free of obstructions.

      CAUTION

      Do not pull the mains plug out the socket using the power supply cable.

      CAUTION

      Do not carry/transport the device using the power supply cable.

      ATTENTION

      Short circuit hazard. Protect the contacts of the battery pack from metal parts.

      ATTENTION

      Only use and store the charger in dry rooms.

      Note

      Information on which type of charger/adapter is to be used can be found on the type plate of the charger supplied and/or in the technical data in the operating instructions for the device.

      Symbols on the charger

      (Depending on the charger)

      Protect the device from moisture. Store the device in a dry place. Do not subject the device to rain. The device is only suitable for indoor use.
      The device has a built-in fuse. The value (X) in amperes can be found on the respective charger.
      The device meets the requirements of protection class II.

      Battery/battery pack safety instructions

      DANGER

      Do not charge the battery pack in explosive atmospheres.

      DANGER

      Do not throw battery packs into a fire or into the household rubbish.

      DANGER

      Avoid contact with fluid leaking from defective batteries. Immediately rinse off the fluid using water if contact is made, and also consult a doctor in the event of contact with the eyes.

      DANGER

      Danger of explosion. Do not charge any non-rechargeable battery.

      WARNING

      Check that the voltage of the battery pack corresponds with the information on the type plate of the device used.

      WARNING

      Check the battery pack for damages before every operation. Do not use any damaged battery packs.

      WARNING

      Do not charge any damaged battery packs.

      WARNING

      Replace damaged battery packs with battery packs approved by KÄRCHER.

      Does not apply to appliances with a fixed battery

      WARNING

      Do not open the battery pack. Repairs are only to be carried out by qualified personnel.

      WARNING

      Only charge the battery pack with the approved chargers.

      WARNING

      Do not charge the battery unattended. Check the condition of the battery and charger regularly during the charging process.

      WARNING

      Disconnect the charger from the mains and the battery from the charger and stop using the charger and battery if you notice a fault, unusual odours or heat development during charging. Contact the authorized customer service.

      WARNING

      Do not remove permanently installed batteries.

      CAUTION

      Short circuit hazard. Protect the contacts of the battery pack against metal parts.

      CAUTION

      Do not use the battery pack n a dirty or wet condition. Allow the connections to dry out completely before using the battery pack.

      CAUTION

      Remove the battery pack from the device before carrying out any service or care work.

      Does not apply to appliances with a fixed battery

      ATTENTION

      Short circuit hazard. Do not store the battery packs together with metal objects.

      ATTENTION

      Do not submerge the battery in water.

      ATTENTION

      Protect the battery pack against heat, sharp edges, oil and moving unit parts.

      ATTENTION

      Do not subject the battery pack to mechanical stress.

      ATTENTION

      Store the battery pack in a dry place.

      Symbols on the battery pack

      (Depending on device/battery type)

      Do not throw the battery into water.
      Do not throw the battery into fire.
      Do not charge defective battery packs.
      Only use the battery pack with the approved chargers. Information on which type of charger/adapter is to be used can be found on the type plate of the charger supplied and/or in the technical data in the operating instructions for the device.

      Safety instructions for transportation

      The lithium-ion battery is subject to the requirements of dangerous goods regulations.

      The battery pack can be transported by the user in public traffic areas without any further restrictions.

      When shipping by third parties (transport companies), special requirements for packaging and labelling must be observed.

      Do not use the battery pack if the casing is damaged.

      Tape off open contacts.

      Pack the battery tightly and securely. The battery pack must not be able to move in the packaging.

      DANGER

      A defective or non-functional battery pack must not be mailed and must be disposed of on site in accordance with the applicable regulations.

      Observe the national regulations.

      Intended use

      • Only use the device in private households.

      • The device is intended exclusively for cleaning dry surfaces

      • The following are not in accordance with the intended use:

        • Cleaning people, animals, plants or clothing on the body.

        • Soaking up water or other fluids.

        • Extraction of glowing ashes, coal, cigarettes or other flammable or easily inflammable substances.

        • Use in the vicinity of explosive or highly flammable substances.

      Environmental protection

      The packing materials can be recycled. Please dispose of packaging in accordance with the environmental regulations.

      Electrical and electronic devices contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which - if handled or disposed of incorrectly - can pose a potential danger to human health and the environment. However, these components are required for the correct operation of the device. Devices marked by this symbol are not allowed to be disposed of together with the household rubbish.

      Notes on the content materials (REACH)

      Current information on content materials can be found at: www.kaercher.de/REACH

      Accessories and spare parts

      Only use original accessories and original spare parts. They ensure that the appliance will run fault-free and safely.

      Information on accessories and spare parts can be found at www.kaercher.com.

      Warranty

      The warranty conditions issued by our relevant sales company apply in all countries. We shall remedy possible malfunctions on your appliance within the warranty period free of cost, provided that a material or manufacturing flaw is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorised customer service site.

      Further information can be found at: www.kaercher.com/dealersearch

      Further warranty information (if available) can be found in the service area of your local KÄRCHER website under "Downloads".

      Scope of delivery

      The scope of delivery for the appliance is shown on the packaging. Check the contents for completeness when unpacking. If any accessories are missing or in the event of any shipping damage, please notify your dealer.

      Charger

      WARNING

      Charge the device only with the supplied original charger or a charger approved by KÄRCHER.

      • Depending on the device type (see type plate):



      ATTENTION

      The battery must be placed in a well-ventilated area during the charging process.

      ATTENTION

      Please observe the enclosed safety instructions for the battery pack.

      Device description

      The scope of delivery of the unit (dependent on model) is shown on the packaging. These operating instructions describe all possible options.


      1. Control panel with LED display
      2. On/Off switch
      3. Left selection button
      4. Right selection button
      5. Start / pause button
      6. Temperature LED
      7. Battery LED
      8. Filter LED
      9. eco! mode LED
      10. Auto mode LED
      11. Boost mode LED
      12. Floor nozzle LED
      13. Warning symbol LED for "suction channel blocked"
      14. Device error message LED
      15. Handle
      16. Fine filter
      17. Pre-filter
      18. Dust container cover flap with unlocking button
      19. Dust container
      20. Bayonet connector of dust container
      21. Suction fitting
      22. Lever for filter cleaning function
      23. Exhaust filter cover
      24. Battery pack with:
      25. Unlocking button
      26. LED indicator lamp
      27. Charging connection for USB-C plug
      28. Motor-driven floor nozzle with universal brush roll and LED light
      29. ** Suction pipe
      30. Crevice nozzle
      31. Furniture brush
      32. ** Wall bracket
      33. ** Mini turbo nozzle
      34. ** Upholstery nozzle
      35. ** Accessory holder on the suction pipe
      36. ** Flexible extension hose
      37. ** Kinkable suction pipe
      38. ** Storage station with charging function
      39. ** Charging cable (USB-C)
      40. ** Charger (USB-C)
      41. Fine filter
      42. Pre-filter

      ** optional

      Installing the wall bracket

      The scope of delivery includes a wall bracket as well as screws and dowels for tidy storage of the vacuum cleaner.

      Note

      Mount the wall bracket at a suitable point using the screws and dowels supplied.

      For safe storage of the device, position the upper screw mount approximately 1.0 m above the floor, ensuring the floor nozzle rests on the ground.


      ATTENTION

      Material damage due to incorrect installation

      Incorrect installation can damage both the device and the floor covering if it falls.

      Use suitable mounting tools for wall mounting.Take the weight of the device and the loading capacity of the installation location into account when selecting the fasteners.

      WARNING

      Risk of electric shock and injuries

      Make sure there are no electrical cables, water or gas pipes in the wall around the mounting area.

      Note

      The wall bracket can also be used to store accessories (e.g. furniture nozzle and crevice nozzle) alongside the device.


      Installing the free-standing storage station with charging function

      The free-standing storage station allows simultaneous charging with the battery in the device and an additional battery that is pushed into the battery holder rail.

      The storage station is also used to hold accessories.

      Note

      Installation on the wall is not necessary.

      • Guide the mains cable, which is located on the holder of the storage station, through the opening of the lower station plate.

      • Attach the holder to the station plate; you should hear it click into place.

      • To secure it, feed the mains cable through the clamp on the underside of the station plate. The direction of the mains cable can be selected according to requirements or the position of the socket outlet.


      • Insert the device with battery into the holder, making sure it is firmly seated.

      • Slide the second battery into the mounting rail.

      • Plug the mains plug into the socket.

        Battery charging begins.


      ATTENTION

      Risk of injury or damage to property

      If the storage station with charging function is placed in an unfavourable position (e.g. in the middle of a room), this constitutes a tripping hazard and may result in injury and/or it can fall over and damage the device.

      Place the device with the storage station in a safe, quiet place (e.g. wall, corner).

      Initial startup

      Installing accessories

      Note

      The motorised floor nozzle is also driven by its own integrated motor and must therefore always be connected directly to the hand-held device or the suction pipe in order to ensure the power supply.

      All other accessor parts can also be used directly with the hand-held device or with the suction pipe to increase the reach.

      • Push the suction pipe on to the suction fitting of the dust container until it audibly clicks into place.

      • Press the unlocking button and remove the suction pipe from the suction fitting.


      • Push the motorised floor nozzle on to the suction pipe until it audibly clicks into place.

      • Press the unlocking button and remove the motorised floor nozzle from the suction pipe.


      • Push the accessory, such as the crevice nozzle, on to the suction fitting of the dust container or suction pipe until it audibly clicks into place.


      Inserting the battery

      ATTENTION

      Dirty contacts

      Damage to the device and battery

      Check the battery mount and the contacts for soiling and clean them as necessary before inserting the battery.

      Note

      Use only fully charged batteries.

      1. Push the battery into the mounting in the device until it audibly latches into place.


      Removing the battery

      WARNING

      Uncontrolled startup

      Risk of injury

      Remove the battery from the device before service and care work or if the device is not going to be used for a long period of time.
      1. Press the unlocking button.

      2. Remove the battery from the device.


      Charging the battery

      ATTENTION

      Use only KÄRCHER Battery Power packs with a nominal voltage of 28 V.

      Note

      The device is supplied with a fully charged battery pack. Fully charge the battery pack before using the device for the first time.

      Please observe the enclosed safety instructions for the battery pack and battery powered vacuum cleaner.

      Note

      When using a commercially available USB plug (type C) or charger (not in the scope of delivery for the device), the charging time may differ from that specified in the operating instructions, depending on the power.

      Note

      The battery pack can be charged with the device, separately or via the storage station with charging function.

      1. Battery charging on the device (e.g. device is on the wall bracket) or battery separately:

        • Insert both USB-C plugs of the charging cable into the charging port of the battery and charger. Plug the charger into the mains socket.


      2. Device is in the storage station with charging function and / or battery is in the back of the battery holder rail:

        • Charging, see chapter Installing the free-standing storage station with charging function


      3. Charging is indicated by the LED indicator lights:

        The LED indicator light flashes green during the charging process.

      4. When the device is fully charged, the LED indicator light on the battery lights up continuously green for 1 min. and then goes out.

        The battery LED on the display lights up green constantly. ​​After 5 minutes, the LED goes out.


      5. Remove both USB-C plugs of the charging cable from the charging port of the battery and charger.

      6. Remove the USB-C charger or mains plug from the storage station with charging function from the socket.

      7. Remove the device from the wall bracket or the storage station or insert the battery into the device, see chapter Inserting the battery

        The device is ready for use.

      Operation

      Vacuuming

      ATTENTION

      Device damage

      If the filters or dust container are not installed or are not installed correctly, the device may not work properly or may be damaged.

      Only use the device when all filters and the dust container are correctly inserted.Defective filters and filters that can no longer be cleaned must be replaced.

      Note

      For instant, attachment-free handheld vacuuming, the device can also be used with the suction nozzle only.

      1. Install the required accessories, see chapter Installing accessories.

        Note

        For quick accessory changes while vacuuming, the accessory holder can be attached to the suction pipe and then the required accessory can be fixed to it.


      2. Switch on the device:

        • Press the On / Off switch.


          Note

          When the device is switched on, the suction strength is always in Auto mode (level 2).

          Note

          The device has intelligent dirt detection. Thanks to the automatic suction power control in auto mode, the device can adjust to the degree of contamination and work effectively and energy-efficiently.

      3. Adjust the suction strength on the control panel as required using the left or right selection buttons (e.g., for Boost mode).


      4. Interrupt work with the Start / Pause button.


        Note

        The device has 3 suction strengths.

        1. eco!-Modus: For cleaning small amounts of dust.

        2. Auto mode: For daily cleaning.

          The device automatically regulates the power depending on the degree of contamination.

        3. Boost mode: Maximum power for high-performance cleaning (with this suction power setting, the battery is discharged more quickly than with other settings).

      Ending operation

      ATTENTION

      Device damage

      If the pre-filter and fine filter are not cleaned regularly or the dust container is not emptied, the suction power will deteriorate and the device may break down.

      Clean the fine filter after finishing each job or at least once a week by activating the filter cleaning function.Empty the dust container after every cleaning. Wipe out the dust container with a dry cloth.In case of heavy contamination, see chapterClean the pre-filter, fine filter and dust container

      Note

      The device is equipped with a filter cleaning function. By moving the lever from one side to the other, fine dust is removed from the filter without contact.

      1. Switch off the device.

        • Press the On / Off switch.


      2. Remove the suction pipe or accessory.

      3. Activate the filter cleaning function by moving the lever from one side to the other approx. 3 times.


      4. Empty the dust container.

        • Press the unlocking button. The flap of the dust container opens.

        • Empty the dust container into a waste container.


      5. To close, push flap of the dust container up until it clicks into place.

      6. Remove the dust container and clean it with a dry cloth.

        Note

        In case of heavy contamination, see chapterClean the pre-filter, fine filter and dust container

      7. Attach the device to the wall bracket or storage station.



      8. Store accessories on the wall bracket or on the storage station.


      9. Charge the device, see chapter Charging the battery.

      How to use the Accessories

      General application instructions

      • Which accessories are included in the scope of delivery is shown on the device packaging.

      • Accessories not included in the packaging can be purchased in a KÄRCHER specialist shop or from www.kaercher.com.

      • Test the accessory at an inconspicuous point before using it in a sensitive area.

      • Follow the manufacturer's cleaning instructions.

      Motor-driven multi-function floor nozzle with LED

      For hard floors and carpets.

      The motorised floor nozzle removes dirt stuck between the carpet fibres particularly effectively.

      The roller brush can be removed from the floor nozzle for cleaning (e.g. in the event of hair entanglement).

      Crevice nozzle

      For edges, joints, heaters and areas that are difficult to reach.

      Furniture brush

      For gentle and thorough cleaning of furniture and sensitive surfaces, dusting of books, air vents in cars, etc.

      Mini turbo nozzle

      Ensures efficient removal of pet hair and dust particles from upholstered furniture, mattresses or other soft surfaces. The rotating round brush picks up even the finest hairs.

      Upholstery nozzle

      For cleaning textile surfaces such as sofas, armchairs, mattresses, car seats, etc.

      Kinkable suction pipe

      The flexible joint enables cleaning under furniture and in hard-to-reach places.

      The kink function is activated by pressing the unlocking button located at the rear of the suction pipe.

      Accessory holder

      For practical storage and quick access to hand nozzles.

      Attach the accessory holder to the suction pipe and attach the accessories (e.g. crevice nozzle).

      Flexible extension hose

      Due to the extension and flexibility, hard-to-reach areas such as in the car can be reached and cleaned.

      Transportation

      The battery has been tested in accordance with the relevant rules for international transport, and can be transported / shipped.

      Storage

      ATTENTION

      Moisture and heat

      Risk of damage

      Store batteries only indoors in a dry place with low humidity and temperatures below 20°C.

      Care and service

      Clean the pre-filter, fine filter and dust container

      ATTENTION

      Device damage

      If the pre- and fine filters as well as the dust container are not cleaned regularly, suction performance will deteriorate and the device may be damaged.

      Clean the pre-filter, fine filter and dust container at least once a month.The dust container and pre-filter can be cleaned under running water or with a damp cloth.Only knock out the fine filter and clean with a soft brush or cloth.

      Note

      The dust container must not be cleaned in the dishwasher.

      Note

      Replace the fine filter if it is visibly damaged or every 6 months.

      Note

      The dust container must be empty before cleaning.

      Note

      The battery can also be removed from the device head for easier handling during cleaning.

      1. Switch off the device:

        • Press the On / Off switch.


      2. Remove the dust container:

        • Hold the dust container at the base and unlock the bayonet connector by turning it towards the “open lock” symbol, then remove it.


      3. Remove the fine filter and pre-filter:

        • Unlock the pre-filter by turning it counter-clockwise and remove it.


        • Pull the fine filter downwards.

          ATTENTION

          Device damage

          If the device is turned 180 degrees for filter cleaning (fine filter pointing upwards), fine dust can fall into the motor area and damage the device.

          Always hold the device downwards when cleaning / removing the fine filter.

      4. Check the suction channel for residues and clean if necessary, seeCleaning and checking the suction channel


      5. Pre-cleaning of pre-filter and fine filter.

        • Any tangled threads or hairs on the pre-filter can be carefully cut off with scissors.

        • Carefully knock out the pre-filter and fine filter on a waste basket.


        • Then clean the fine filter with a soft brush or cloth.

          Note

          In order not to impair the functionality of the fine filter, do not clean the filter with water.


      6. Clean the pre-filter and dust container with water or a damp cloth, then leave to dry completely


        ATTENTION

        Health risk

        Pre-filters / dust containers that are not completely dry when installed in the device can be a breeding ground for spores and mould.

        Ensure that the pre-filter and dust container are completely dry before reassembly.
      7. Insert the fine filter and pre-filter:

        • When inserting the fine filter, make sure that the filter slats are correctly positioned in the filter holder.


        • Fasten the pre-filter by turning it clockwise. Check for correct seating.

        • Place the dust container on the device and lock it by turning it in the direction of the "Lock closed" symbol. Check for correct seating


      Cleaning and checking the suction channel

      ATTENTION

      Device damage

      Suction particles such as hair, toy parts or food residues can block the suction channel. This reduces the suction performance and can lead to damage to the device.

      Therefore, check the suction channel for blockages at least once a month and remove them if necessary.
      1. Switch off the device:

        • Press the On / Off switch.


      2. Remove the dust container, pre-filter and fine filter, see Clean the pre-filter, fine filter and dust container

      3. Cleaning and checking the suction channel:

        • Hold the device head so that you can look into the suction channel unhindered.

        • If there are any suction particles, carefully remove them with a plastic or wooden stick.

          Note

          Do not use any sharp-edged or pointed objects to avoid damaging the non-return valve.


      4. Reattach the dust container, pre-filter and fine filter to the device.

      Cleaning the exhaust filter

      ATTENTION

      Short circuit hazard

      The device head contains electrical components.

      Do not immerse the exhaust filter in water and do not clean with a damp cloth.

      Note

      The device is equipped with a long-life exhaust filter.

      Clean the exhaust air filter at least once a year or when it is visibly dirty.

      Replace a damaged exhaust filter.

      1. Switch off the device:

        • Press the On / Off switch.


      2. Remove the exhaust filter:

        • Unscrew and remove the exhaust filter cover from the device.

        • Remove the exhaust filter from the cover.

      3. Cleaning the exhaust filter:

        • Carefully tap off the exhaust filter or, if it is very dirty, carefully clean it together with the cover using a soft cloth or brush.


      4. Clean the exhaust filter:

        • Plug the exhaust filter and cover together and screw onto the device head. Check for correct seating.

      Cleaning the motorised floor nozzle

      1. Switch off the device.

        • Press the On / Off switch.


      2. Remove the floor nozzle.

      3. ATTENTION

        Short circuit hazard

        The motorised floor nozzle contains electrical components.

        Do not immerse the motorised floor nozzle in water or clean it with a damp cloth.

        Clean the motorised floor nozzle.

        1. Turn the release in the direction of the "lock open" symbol and remove the roller brush.


        2. Remove the dirt e.g. with a brush. Any tangled threads or hairs can be carefully cut off with scissors.

        3. Carefully clean the brush opening with a cloth or soft brush.


        4. Insert the roller brush into the brush opening and lock it by turning it in the direction of the "Lock closed" symbol. Check for correct seating.


      Cleaning the mini turbo nozzle

      1. Switch off the device.

        • Press the On / Off switch.


      2. Remove the mini turbo nozzle.

      3. ATTENTION

        Short circuit hazard

        The mini turbo nozzle contains electrical components.

        Do not immerse the mini turbo nozzle in water or clean it with water.

        Clean the mini turbo nozzle.

        1. Unlock the roller brush by pressing the side of the roller brush cover, then pull the roller brush downward to remove it.


        2. Remove residue, e.g. with a brush. Any tangled threads or hairs can be carefully cut off with scissors.

        3. Carefully clean the brush opening with a cloth or soft brush.


        4. Insert the roller brush into the side of the housing at a slight angle and then press upwards until the cover clicks into place.


      TEMPLATE TROUBLESHOOTING-TABLE

      Fault
      Cause
      Rectification
      Person responsible

      Troubleshooting guide

      Malfunctions often have simple causes that you can remedy yourself using the following overview. When in doubt, or in the case of malfunctions not mentioned here, please contact your authorized Customer Service.

      Note

      • The "LED displays" section describes the LED symbols that appear on the device display or that can be recognised visually if there is a malfunction.

      • The "Functional Malfunctions" section describes malfunctions that can occur independently of the LED display.

      LED displays

      LED symbol
      Device behaviour
      Cause
      Rectification
      Battery LED lights up orange permanently.
      The device is on / sucking.
      Battery capacity low (at approx. 30%).
      • The battery must be charged.

      Battery LED lights up red permanently.
      The device is on / sucking.
      Battery capacity is very low (at approx. 10%).
      • The battery must be charged promptly.

      Floor nozzle LED lights up red permanently.
      The device is switched on / the floor nozzle is not running.
      The cleaning roller is not inserted or not inserted correctly.
      and / or
      the cleaning roller in the floor nozzle is blocked.
      • Insert the cleaning roller into the floor nozzle.

      • Remove the cleaning roller from the floor nozzle and clean the cleaning roller and floor nozzle or remove blockages (e.g. hair)

      Warning symbol LED lights up red permanently.
      Device and floor nozzle stop function / device cannot be switched on.
      There is a blockage in the device (e.g. in the suction pipe or suction channel) / the dust container is full / the fine filter is clogged or broken.
      • Remove any blockage or clog in the suction port, suction channel, accessories, or suction pipe using a suitable aid.

      • Empty the dust container.

      • Clean the filter or replace it with a new filter.

      Battery LED flashes red.
      The battery is flat.
      • Charge the rechargeable battery.

      Filter LED lights up red permanently.
      Device and floor nozzle stop function / device cannot be switched on.
      Fine filter is not inserted / is not inserted correctly.
      • Insert fine filter / insert fine filter correctly.

      Device error message LED lights up orange permanently.
      Malfunction of the dust sensor, e.g., due to hair, dust, or other deposits.
      • Switch the device off and on again.

      • If the error message persists, check and clean the suction channel.

      Temperature LED lights up red permanently.
      Battery/device is overheated or undercooled.
      • Switch off the device and disconnect from the current supply / battery.

      • Wait until the battery temperature/device temperature is within the normal range.

      Battery and device error message LED lights up permanently red.
      Device stops charging the battery because the battery has a malfunction / device switches off.
      Charging cable / charging adapter is not supported or is damaged or there is a battery fault.
      • Insert the charged battery into the device.

      • Switch the device off and on again.

      Device error message LED lights up red permanently.
      Device stops all functions / device cannot be switched on.
      There is a malfunction.
      • Switch the device off and on again.

      • If nothing is found, contact KÄRCHER Customer Service.

      • Suction force decreases 

      • The device does not start up 

      • The battery is not charging 

      • Charging time is changed 

      • Dust container cannot be inserted. 

      • Abnormal engine noise 

      Suction force decreases

      Cause:

      Fine filter is dirty or damaged.

      Cause:

      Suction channel is blocked.

      Remedy:

      • Clean the fine filter or replace it with a new fine filter.

      Remedy:

      • Check suction channel and remove blockage.

      The device does not start up

      Cause:

      Battery is empty.

      Remedy:

      • Charge the rechargeable battery.

      The battery is not charging

      Cause:

      The charging plug/mains plug is not connected correctly.

      Remedy:

      • Connect the charging plug/mains plug correctly.

      Cause:

      The socket is defective.

      Remedy:

      • Check that the socket is working.

      Cause:

      The wrong charger is being used

      Remedy:

      • Check that the correct charger is being used.

      Charging time is changed

      Cause:

      Use of a USB cable (type C) or charger outside the scope of delivery.

      Remedy:

      • For a specified charging time, use the USB cable (type C) / charger included in the scope of delivery.

      Dust container cannot be inserted.

      Cause:

      Filter unit is not complete.

      Remedy:

      • Check whether the filter unit (pre-filter and fine filter) is complete.

      Abnormal engine noise

      Cause:

      The accessories, the suction opening on the dust container or the suction pipes are clogged.

      Remedy:

      • Remove the clog with a suitable aid.

      Functional malfunctions

      • Suction force decreases 

      • The device does not start up 

      • The battery is not charging 

      • Charging time is changed 

      • Dust container cannot be inserted. 

      • Abnormal engine noise 

      Suction force decreases

      Cause:

      Fine filter is dirty or damaged.

      Cause:

      Suction channel is blocked.

      Remedy:

      • Clean the fine filter or replace it with a new fine filter.

      Remedy:

      • Check suction channel and remove blockage.

      The device does not start up

      Cause:

      Battery is empty.

      Remedy:

      • Charge the rechargeable battery.

      The battery is not charging

      Cause:

      The charging plug/mains plug is not connected correctly.

      Remedy:

      • Connect the charging plug/mains plug correctly.

      Cause:

      The socket is defective.

      Remedy:

      • Check that the socket is working.

      Cause:

      The wrong charger is being used

      Remedy:

      • Check that the correct charger is being used.

      Charging time is changed

      Cause:

      Use of a USB cable (type C) or charger outside the scope of delivery.

      Remedy:

      • For a specified charging time, use the USB cable (type C) / charger included in the scope of delivery.

      Dust container cannot be inserted.

      Cause:

      Filter unit is not complete.

      Remedy:

      • Check whether the filter unit (pre-filter and fine filter) is complete.

      Abnormal engine noise

      Cause:

      The accessories, the suction opening on the dust container or the suction pipes are clogged.

      Remedy:

      • Remove the clog with a suitable aid.

      Technical data

        

      Electrical connection
      Nominal voltage of battery
      25,2 - 25,9 V
      Rated power
      350 W
      Battery pack type
      Li-ION
      Rated capacity (according to IEC/EN 61960)
      2,35 Ah
      Nominal voltage of charger
      100 - 240 V
      Frequency
      50 - 60 Hz
      USB-C charger
      _
      Model
      HX20WPD-C001-AG
      Number of batteries to be charged
      1
      Storage station with charger
      _
      Part number
      9.759-858.0
      Number of batteries to be charged
      1
      Charging time when the battery is completely discharged with USB C charger
      240 min
      Charging time when the battery is completely discharged with charging station
      180 min
      Charging time when the battery is completely discharged with charging station and inserted battery
      360 min
      Protection class
      II
      Device performance data
      Tank content
      0,8 l
      Operating time when battery is fully charged with floor nozzle eco!/Auto/Boost
      45/*30/10 min
      Sound power level LwA
      <78 dB(A)
      Dimensions and weights
      Weight (with battery, without accessories)
      1.9 kg
      <BackPage>

      2-2-SC-A5-GS



      </BackPage>