High-pressure washer HD 7/17 M St
HD 7/17 M St pump unit with powerful and robust 3-piston axial pump with hardened stainless steel pistons, three-phase motor and wall mount for stationary use.
With a flow rate of around 700 litres per hour and a working pressure of up to 170 bar, our powerful HD 7/17 M St motor/pump unit with three-phase motor and pressure switch control has proven itself under tough daily conditions. The newly developed pump technology featuring 3-piston axial pump with hardened stainless steel pistons and brass cylinder head guarantees a long service life and increases energy efficiency and cleaning performance by at least 20%. The machine is intended for stationary use and can be mounted and operated both horizontally and vertically. A 3-point support on the back enables vertical or horizontal mounting. Access to the high-pressure pump and the electronic components is easy and therefore service-friendly – the pump itself is effectively protected from dirt in reclaim water by means of a large water fine filter.
Features and benefits
High-quality equipment
Automatic pressure relief for protecting the components extends their life. Powerful, 2-pole, air-cooled electric motor. High-quality brass cylinder head.Flexible operation
For vertical and horizontal operation.Prepared for stationary operation
Simple and robust 3-point attachment for wall mounting on the rear of unit. Space-saving, compact design. Robust plastic chassis reliably protects the pump against damage and dirt.Easy servicing
- Easy access to the cylinder head through the open part at the bottom of the machine.
- Quick access to the electrical box by simple removal of the machine cover.
- Large, easy-to-reach water fine filter for protecting the pump against dirt particles in the water.
Increased energy efficiency
- Newly developed 3-piston axial pump with considerably reduced flow and pressure losses.
- 20% increase in cleaning performance and energy efficiency.
Specifications
Technical data
Supply voltage (Ph/V/Hz) | 3 / 400 / 50 |
Flow rate (l/h) | 700 |
Inlet temperature (°C) | 60 |
Working pressure (bar/MPa) | 170 / 17 |
Max. pressure (bar/MPa) | 255 / 25,5 |
Connected load (kW) | 4,2 |
Power cable (m) | 5 |
Water inlet | 3/4″ |
Colour | anthracite |
Weight (with accessories) (kg) | 23,2 |
Weight incl. packaging (kg) | 25,7 |
Dimensions (L x W x H) (mm) | 290 x 300 x 565 |
Equipment
- Pressure switch-off