High-pressure cleaner HDS 13/20 -4 St EU-I
Designed for continuous use without compromise: the HDS 13/20-4 St stationary hot water high-pressure cleaner with oil burner cleans by delivering up to 1300 litres of water per hour at 200 bar pressure.
The HDS 13/20-4 St is a stationary hot water high-pressure cleaner with an oil burner. Its 4-pole, low-speed electric motor supplies power for continuous operation in demanding environments. The crankshaft pump with brass cylinder head enables cleaning with up to 1,300 liters of water per hour and 200 bar pressure. A water filter protects the pump from dirt particles. The integrated water break tank features a limescale protection system. Detergent is drawn in and metered via a control valve. A low-detergent indicator alerts the user when the tank is empty. Electronic monitoring of the oil burner and system parameters provides continuous operational control. A rotary switch or an optional remote control enables system operation, while service and maintenance points are structured for ease of access. A range of available accessories allows the HDS 13/20-4 St to be adapted to different cleaning tasks. The unit can be equipped with a pressure gauge, an operating hours counter, a second detergent dosing system, and a pressure relief system
Features and benefits
High-performance crankshaft pump
Crankshaft pump with brass cylinder head and ceramic piston Crankshaft pump from Kärcher for consistent pressure generation during operation. Longer service life, less maintenance effort and lower costs. Ideal for industrial use.
4-pole low-speed electric motor
Water-cooled motor for a high performance and long service life. 4-pole, slow-running electric motor guarantees a long working time. High performance
Engineered Kärcher burner technology with demand-based fuel feed
High-output oil burner with upright heating coil and detonation-free continuous ignition. Engineered Kärcher burner technology with demand-based fuel feed Burner with high effectiveness (> 91%), low fuel consumption and very low exhaust emissions.High-quality equipment
- Integrated water reservoir with limescale protection and empty indicator protects the heating coil and the entire system from lime deposits.
- The housing and frame are made from powder-coated steel
Electronic monitoring for greater operational safety.
- Switches off in case of leaks or phase failure.
- Automatic switch-off in case of low voltage range or overvoltage.
- Automatic burner cut-out in case of water shortage and overheating.
Simple and intuitive operation
- Just one rotary switch for all functions guarantees simple operation without long training times.
- Practical error display informs users immediately and saves time.
- Self-explanatory symbols make the machine easy to understand and simplify operation significantly.
Large, transparent water fine filter
- Easy-to-access water filter protects the pump against dirt particles in the water.
- Ensures long service life for all high-pressure components.
- Integrated water filter can be removed and cleaned without any tools.
High flexibility
- The machine can alternatively be controlled with a remote control.
- In its extensive range of accessories for high-pressure cleaners, Kärcher has the right accessory for every cleaning task and every objective.
Cleaning agent suction and dosing system for even better cleaning results
- For convenient and accurate dosing of cleaning agents.
- Detergent can be added via the dosage selector.
Service-friendly design with easily accessible maintenance points
- Easy access to all service and maintenance components.
- Comprehensive service network with highly trained service technicians.
- Display of error codes, operating status, pump maintenance intervals and monitoring for faulty operation of the burner and the entire machine make servicing easier.
Specifications
Technical data
| Number of current phases (Ph) | 3 |
| Voltage (V) | 400 |
| Frequency (Hz) | 50 |
| Flow rate (l/h) | min. 700 - max. 1300 |
| Working pressure (bar) | 200 |
| Max. pressure (bar) | 235 |
| Temperature (for supply 12 °C) (°C) | max. 80 |
| Inlet temperature (°C) | max. 30 |
| Connected load (kW) | 9,5 |
| Consumption of fuel oil at full load (kg/h) | 9,1 |
| Heat energy (kW) | 108 |
| Power cable (m) | 5 |
| Water inlet | 1″ |
| Number of users at one time | 1 |
| Portability | stationary |
| Protection (A) | 25 |
| Weight (with accessories) (kg) | 160 |
| Weight incl. packaging (kg) | 170 |
| Dimensions (L × W × H) (mm) | 1142 x 578 x 790 |
Scope of supply
- Flame monitoring
- Prepared for Servo Control
- Prepared for remote operation
- Power nozzle
- Detergent function: Suction
Equipment
- Oil dipstick
- Sight glass for oil level
- Pre-equipped for a detergent inlet
- RM1 dosage
- Dry-running protection
- Large water fine filter
- Storage tank with float valve
- Crankshaft pump with ceramic pistons
- Water-cooled motor
- Frame and cover: Steel, powder-coated
Application areas
- Cleaning tractors, machines and implements in agriculture
- Versatile applications in industrial settings, e.g. for cleaning production facilities
- High-pressure cleaning of machines and equipment in the construction, agricultural and municipal sectors
- Suitable for use in production halls, warehouses, logistics buildings and heavy industry facilities
- Intensive high-pressure cleaning for extreme dirt in agriculture and construction
- For cleaning machines and vehicles
- Ideal for applications in the food and chemicals industries
- Agriculture
- Public sector
- Ideal for car workshops, vehicle rental stores, car wash centers, building service contractors, trade professionals, small construction companies, small garages and farms, etc.
